Xflow ring gear/flywheel

[Bigchris092]

Looking for a replacement ring gear or flywheel for my xflow. Ring gear has split- I have an inertia type starter motor

Chris

[litcoat]

Is the ring gear the same on a 1300 as a 1600, if it is I've got one.

Mark

[Bigchris092]

I can't be sure, I will do a little research and get back to you

I know inertia/pre engaged rings are different but not sure how to identify. Still haven't got the engine/gbox out

Will let you know, thanks.

[Bigchris092]

Hi, the 1300/1600 Ring gears are the same. The only difference being pre-engaged and inertia. The majority if not all of the 1300's used the inertia type starter so hopefully it's correct. Can you confirm if the teeth have a chamfered edge?

If so how much are you looking for?

Chris

[litcoat]

Sorry Chris, just saw your post, I'll check tomorrow and let you know.

Cheers Mark

[Bigchris092]

Did you manage to check?

Thanks

Chris

[litcoat]

Hi Chris, just managed to get time to check, yes the teeth are chamfered, is there an easy way to get them off, I've been trying, just managed to bend a spanner and knackered a ratchet, they're not reverse threads are they?

Cheers Mark

[Bigchris092]

They are heated until they expand, dropped on and allowed to cool... I didn't realise it was on a flywheel. Probably too much trouble for you to remove. Do you need the flywheel?

Chris

[Bigchris092]

They are heated until they expand, dropped on and allowed to cool... I didn't realise it was on a flywheel. Probably too much trouble for you to remove. Do you need the flywheel?

Chris

[litcoat]

Not bothered about the fly wheel,it's getting the 6 bolts out that hold it all on, its going to be the heavy duty tackle tomorrow night