MWMSport Posted January 4, 2016 Share Posted January 4, 2016 Up for grabs is my Scholar Racing engine 1.8 silvertop Zetec Covered just over 16,000miles Spec is as follows- ARP Rod bolts Ported and polished cylinder head Regrind piper cams Jenvey ITBs with piper cross filter Base manifold ported and matched to head MBE956 ECU Mapping lead Race loom Alternator and brackets All sensors, injectors and coil MBE is mapped to a set of Bosch injectors but one is temperamental (I will supply these injectors as they are fine for start up and to drive on to get the engine mapped), I'm supplying a set of ST170 injectors recently cleaned and flow tested but the ECU will need mapping for the ST injectors. Estimated power is around 175bhp This was a great engine and runs fine, No clutch, exhaust or thermostat housing supplied but with these bits sourced, you should have pretty much everything you need to get running. £1500ono Any questions, please give me a call on 07985266042. I could also supply the engine with a MoTeC M800 and UTC with a Rachan DR-25 loom and all sensors for an additional £2000.00 This included fuel pressure and oil pressure monitoring The MoTeC has been correctly mapped for the ST170 injectors 1 Link to comment Share on other sites More sharing options...
Kingster Posted January 4, 2016 Share Posted January 4, 2016 Bargain! Link to comment Share on other sites More sharing options...
msdavenport91 Posted February 16, 2016 Share Posted February 16, 2016 PM sent. Is the engine still available? Thanks, Mark. Link to comment Share on other sites More sharing options...
Recommended Posts