John Loudon - Sponsorship Liaison Posted October 14, 2002 Posted October 14, 2002 Brand new uprated AP Racing clutch cover and friction plate - still boxed £100 Brand new Piper vacuumless Lucas side exit distributor with modified advance curve to max 35 degrees. New cap and rotor included but no drive gear - still boxed £35 One piece steel front pulley for X/Flow - £15 Alloy rocker cover for dry sumped X/Flow - £15 Rocker assembly with steel rocker posts for X/Flow - £20 High pressure oil pump for X/Flow, good condition - £10 X/Flow thermostat housing with rad cap filler neck (Mk1 XR2) - £10 Standard X/Flow crank (ground to -0.010"), standard rods and standard flywheel suitable for lightening - £25 the lot Various other X/Flow odds and sodds. Let me know if theres something your need. I might have it. Im in Coventry Regards, John Loudon 07971 576848 02476 511518 jloudon@usa.net
Gazza Posted October 14, 2002 Posted October 14, 2002 Hi John! Do you have an alloy WET sump rocker cover going spare? I'd like a spare one to experiment with different breather arrangements. D'ya have any (unused! Xflow gaskets such as: Big-bore exhaust Sump (competition or cork) Rocker cover Inlet Timing chain cover Rear oil seal cover Water pump I'll gladly have any of the above off you. Trust your Puma-isation's going OK
John Loudon - Sponsorship Liaison Posted October 14, 2002 Author Posted October 14, 2002 Gary and Studbuckle Ive sent you both an email. JL
.thumb.jpeg.8a226d4820449fe60c2016939f1de7c1.jpeg)
Recommended Posts