tuonokid58 Posted August 26, 2015 Posted August 26, 2015 (edited) In 2010 I bought an uncompleted Westfield SEI off a guy near York. The car came with the red top engine but it wasn't fitted but sat upside down, minus sump on an old arm chair in the garage. So my plan was to strip it, get it chemically cleaned and then rebuild it using new parts where necessary. I then managed to get a brand new crate 2.0 Zetec Blacktop for £590 so the red top build was put into the projects drawer. As I've probably got 2 years worth of welding on my sons Anglia I will probably not get round to doing it now so it's surplus to requirements. The stuff for it to fit in a Westfild (included) all unused! Yukspeed alloy bellhousing for type 9 or earlier box Clutch pressure and driven plate (no release bearing) Crankshaft spigot bearing to suit type 9 Herbee engineering cast alloy sump (raised) with baffle and oil pick up to suit. Full Mocal remote filter kit with hoses Westfield engine mounts minus one rubber Westfield alternator bracket kit Inlet manifold to suit Jenveys or DCOEs The engine itself must be an earlier one as it comes with a distributor. I stripped the head off last year to have a look and the bores look good. All the items that came off including the buckets have been bagged and lubricated and are available for inspection. The Herbee sump is loosely bolted to the engine so it can come off to inspect the crank if required. If anyone wants to buy they are welcome to spend as much time as they want examining the engine to make sure they are happy with it before buying. I'm looking for £1100 for everything. If you are interested PM me on here and I will get back to you with further details including photos if required. I am located in Denby Dale nr Huddersfield in W Yorks and the engine and ancilliaries are for pick uyp only Edited June 13, 2018 by tuonokid58 additional information
tuonokid58 Posted September 7, 2015 Author Posted September 7, 2015 Reduced to £1,000 now but will not reduce anymore as it will go on other forums or I will keep it. Barry
Shaggydoo Posted September 8, 2015 Posted September 8, 2015 I think Lee Smith might be interested in this. Drop him a pm
FILFAN Posted October 13, 2015 Posted October 13, 2015 Hi Barry. You would do allot better if the engine was built up rather than in pieces. If you decided to split I would be interested in the bell housing. Phil
Kingster Posted October 13, 2015 Posted October 13, 2015 I'd be interested in Mocal filter kit - if it has 3/4 fitment to suit Zetec (or is an easy mod)
tuonokid58 Posted October 13, 2015 Author Posted October 13, 2015 Sorry guys, I want to keep it all together but thanks for asking. Barry
tuonokid58 Posted June 12, 2018 Author Posted June 12, 2018 Last chance guys now going for 800 pounds. Barry
John Dolan - Wirral & North Wales AO Posted June 12, 2018 Posted June 12, 2018 That's a bargain. Sell the parts individually and you'll double that. Forget eBay, there are lots of Facebook forums to post on, for free.
Rob the Red Top Posted August 28, 2018 Posted August 28, 2018 Have you tried the rally forums.. Sold mine with Jenveys (old ones) within a week for £1300 to an Escort owner. The engine was stock.
tuonokid58 Posted August 28, 2018 Author Posted August 28, 2018 Hi Rob I tried looking for Escort forums when I first put it up for sale but I drew a blank. I knew it was a favoured engine for MK1 and 11 Escorts as I bought the bell housing from Yuk at Yukspeed so any idea which forums? Thanks for posting by the way. Barry
griffith500user Posted August 29, 2018 Posted August 29, 2018 23 hours ago, tuonokid58 said: Hi Rob I tried looking for Escort forums when I first put it up for sale but I drew a blank. I knew it was a favoured engine for MK1 and 11 Escorts as I bought the bell housing from Yuk at Yukspeed so any idea which forums? Thanks for posting by the way. Barry Try Turbosport.co.uk I’ve had some luck there. GLWTS 1
Recommended Posts