Vauxhall red top engine and ancilliaries for Westfield now reduced again!!!

[tuonokid58]

In 2010 I bought an uncompleted Westfield SEI off a guy near York. The car came with the red top engine but it wasn't fitted but sat upside down, minus sump on an old arm chair in the garage. So my plan was to strip it, get it chemically cleaned and then rebuild it using new parts where necessary. I then managed to get a brand new crate 2.0 Zetec Blacktop for £590 so the red top build was put into the projects drawer.
As I've probably got 2 years worth of welding on my sons Anglia I will probably not get round to doing it now so it's surplus to requirements.

The stuff for it to fit in a Westfild (included) all unused!
Yukspeed alloy bellhousing for type 9 or earlier box
Clutch pressure and driven plate (no release bearing)
Crankshaft spigot bearing to suit type 9
Herbee engineering cast alloy sump (raised) with baffle and oil pick up to suit.
Full Mocal remote filter kit with hoses
Westfield engine mounts minus one rubber
Westfield alternator bracket kit
Inlet manifold to suit Jenveys or DCOEs

The engine itself must be an earlier one as it comes with a distributor. I stripped the head off last year to have a look and the bores look good. All the items that came off including the buckets have been bagged and lubricated and are available for inspection. The Herbee sump is loosely bolted to the engine so it can come off to inspect the crank if required. If anyone wants to buy they are welcome to spend as much time as they want examining the engine to make sure they are happy with it before buying.
I'm looking for £1100 for everything.
If you are interested PM me on here and I will get back to you with further details including photos if required.
I am located in Denby Dale nr Huddersfield in W Yorks and the engine and ancilliaries are for pick uyp only

Edited June 13, 2018 by tuonokid58
additional information

[tuonokid58]

 

 

 

 

 

 

 

 

 

 

 

[tuonokid58]

Reduced to £1,000 now but will not reduce anymore as it will go on other forums or I will keep it.

Barry

[Shaggydoo]

I think Lee Smith might be interested in this. Drop him a pm

[tuonokid58]

Cheers Shaggy

[tuonokid58]

Bump. Last chance.

[FILFAN]

Hi Barry.

You would do allot better if the engine was built up rather than in pieces.

If you decided to split I would be interested in the bell housing.

Phil

[Kingster]

I'd be interested in Mocal filter kit - if it has 3/4 fitment to suit Zetec (or is an easy mod)

[tuonokid58]

Sorry guys, I want to keep it all together but thanks for asking.

Barry

[tuonokid58]

Last chance guys now going for 800 pounds.

Barry

[John Dolan - Wirral & North Wales AO]

That's a bargain.

Sell the parts individually and you'll double that.

Forget eBay, there are lots of Facebook forums to post on, for free.

[tuonokid58]

Bump again!

[Rob the Red Top]

Have you tried the rally forums.. Sold mine with Jenveys (old ones) within a week for £1300 to an Escort owner. The engine was stock.

[tuonokid58]

Hi Rob

I tried looking for Escort forums when I first put it up for sale but I drew a blank. I knew it was a favoured engine for MK1 and 11 Escorts as I bought the bell housing from Yuk at Yukspeed so any idea which forums? Thanks for posting by the way.

Barry 

[griffith500user]

23 hours ago, tuonokid58 said:

Hi Rob

I tried looking for Escort forums when I first put it up for sale but I drew a blank. I knew it was a favoured engine for MK1 and 11 Escorts as I bought the bell housing from Yuk at Yukspeed so any idea which forums? Thanks for posting by the way.

Barry 

Try Turbosport.co.uk I’ve had some luck there. GLWTS