hawksa Posted April 30, 2015 Share Posted April 30, 2015 About to start mounting my wiring loom to the chassis. Should it be inside split conduit? The build manual does not mention it but I'm sure that I have seen pictures with it used. Thanks, Simon. Quote Link to comment Share on other sites More sharing options...
Andy (Sycho) Posted April 30, 2015 Share Posted April 30, 2015 No it doesn't have to be I only put mine in conduit where I thought it was needed. Andy 1 Quote Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted April 30, 2015 Share Posted April 30, 2015 The choice is yours. Some put it all along the harness others only use it where the harness may rub or be exposed to flying road debris. e.g. rear light wiring etc. I've done the latter. I've used quite a lot on the rear end round the diff cage of different thicknesses. 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted April 30, 2015 Share Posted April 30, 2015 Yeah, the IVA manual only says something along the lines of cables and hoses should be protected from chaffing. I've chosen to cover probably 90-95% of mine, just because it worked out looking neater, and because it offered extra protection from the elements in areas like the tunnel and around the rear diff cage and engine bay. But the choice is yours! 1 Quote Link to comment Share on other sites More sharing options...
dombanks Posted April 30, 2015 Share Posted April 30, 2015 Check out the offerings from polevolt they do a great range of tubing and joiners that all look very neat when done Quote Link to comment Share on other sites More sharing options...
tex Posted May 6, 2015 Share Posted May 6, 2015 until you need to get at the wires... hmmmm nightmare Quote Link to comment Share on other sites More sharing options...
pete g Posted May 7, 2015 Share Posted May 7, 2015 put all mine in conduit looks much better 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted May 7, 2015 Share Posted May 7, 2015 Agreed Pete. Looks much better as well as keeping it safe and neat. If you use the split convoluted type, it's easy enough to open a section if you should need to. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.