Nick Algar - Competition Secretary Posted November 26, 2017 Posted November 26, 2017 Is it worth modifying the chassis to make it fit? Just a thought
Gary Taylor Posted November 26, 2017 Posted November 26, 2017 9 hours ago, Valentinik said: Yes they are a fair bit larger but my chassis had to be modified to clear the mx5 5speed clutch release arm. If you use a concentric slave cylinder it may not be a problem. Thanks for that, mine is a Mazda sdv chassis and was wondering if it would fit
AndyD-Yellow Peril Posted November 26, 2017 Posted November 26, 2017 Couple of photos of the mx5 6spd vs 5spd. Just for reference. 6spd above 5spd. Dont have image of Rx8 box though. 2
Tim Reid Posted January 6, 2018 Posted January 6, 2018 On 26/11/2017 at 08:35, Nick - Joint North East AO said: Is it worth modifying the chassis to make it fit? Just a thought You have a good point. I have found someone who has done it in a westfield by modifying the passenger side footwell. Too much work for me so will be either using a type 9 or another option which is in development ;-) 1
Thrustyjust Posted January 10, 2018 Posted January 10, 2018 On 1/6/2018 at 09:53, Tim (TimDave25) - Joint Thames Valley AO said: You have a good point. I have found someone who has done it in a westfield by modifying the passenger side footwell. Too much work for me so will be either using a type 9 or another option which is in development ;-) Interesting Tim. You can tell me on Sunday
Recommended Posts