Andy Banks Posted January 9, 2015 Share Posted January 9, 2015 I built mine outside. Trump that! Someone else built mine Quote Link to comment Share on other sites More sharing options...
TableLeg Posted January 9, 2015 Share Posted January 9, 2015 Welcome, If you haven't considered it already you can ask Westfield to keep hold of the bodywork until you're ready for it. Saves a lot of space while building in a single garage. Quote Link to comment Share on other sites More sharing options...
lewis Posted January 9, 2015 Share Posted January 9, 2015 Just give them plenty of notice of when you want the bodywork (6-8 weeks prior) as the company that makes it seems to be quite slow. Quote Link to comment Share on other sites More sharing options...
Kingster Posted January 9, 2015 Share Posted January 9, 2015 Any good tips Get a half decent compressor and an air riveter - although many have done so, hand riveting 100's (maybe 1000's?) of rivets is literally a pain! (well, it was painful having to hand rivet the dozen or so I couldn't do with the air tool anyway - although I do have a pinned wrist which might explain my "big-girls-blouse-ness"). Review other's build diaries - Dave Eastwood's in particular is full of useful info from someone who clearly knows what they are doing. Quote Link to comment Share on other sites More sharing options...
pete g Posted January 9, 2015 Share Posted January 9, 2015 rolling chassis table is a must in a single garage I would say , just make sure you have some brakes on the wheels . I have a double garage and have mine on 4 wheel trolleys and its great to be able to just push it side ways to work on . http://www.sgs-engineering.com/garage-equipment/wheel-dollies/wd4000-450kg-wheel-dollies-set-of-four Quote Link to comment Share on other sites More sharing options...
Rory's Dad Posted January 9, 2015 Share Posted January 9, 2015 Get a half decent compressor and an air riveter - although many have done so, hand riveting 100's (maybe 1000's?) of rivets is literally a pain! (well, it was painful having to hand rivet the dozen or so I couldn't do with the air tool anyway - although I do have a pinned wrist which might explain my "big-girls-blouse-ness"). Review other's build diaries - Dave Eastwood's in particular is full of useful info from someone who clearly knows what they are doing. When I ordered mine I had Westfield powdercoat and fix the panels (with black rivets). They also fixed the brake and fuel lines. Both jobs are tedious and IMO a bit of an - much better to start with the chassis up on stands and ready for the suspension! 1 Quote Link to comment Share on other sites More sharing options...
Pistol Pete Posted January 9, 2015 Share Posted January 9, 2015 When building ours in a single garage, we hung the main tub from a couple of straps just below the ceiling - nice a safe until it was required. Quote Link to comment Share on other sites More sharing options...
Stu Faulkner Posted January 9, 2015 Share Posted January 9, 2015 I put mine on a site box with wheels. If you are in a single garage then trying to get down each side is difficult. I never rolled it out the garage but getting to each side is easy with wheels Oh and Quote Link to comment Share on other sites More sharing options...
BenD Posted January 9, 2015 Share Posted January 9, 2015 I have just got my car on the floor built mine on a fixed stand never had any problems also in a single garage just make it a nice height to work on and enjoy it Quote Link to comment Share on other sites More sharing options...
hawksa Posted January 10, 2015 Author Share Posted January 10, 2015 Lots of good advice - Thank you. I have already arranged to collect my bodywork etc. at a later date and have paid for the brake and fuel lines to be fitted in the factory. Simon. Quote Link to comment Share on other sites More sharing options...
Kingster Posted January 10, 2015 Share Posted January 10, 2015 Literally got mine down of the stands earlier this evening and built in my very cluttered single garage. Loving the build and looking forward to driving it! Quote Link to comment Share on other sites More sharing options...
Mark Bowyer Posted January 10, 2015 Share Posted January 10, 2015 http://westfield-sportscars.co.uk/showroom-brochures/fw-special-edition-build-manual/ Good luck with the build, really enjoyed mine. If you haven't already done so, there is now an excellent build manual available to download. (See link above) Second the suggestion of a compressor and rivet gun! Mark Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.