DaveB666 Posted September 8, 2014 Share Posted September 8, 2014 Due to changing to a turbo engine I have for sale my old setup - 2.0 Silvertop Zetec 1994 Zetec (pre-CAT) Rebuilt 2,000miles ago with bags of receipts 3kg race flywheel Brand new clutch and pressure plate Modified Westfield release bearing MT75 gearbox Fuel pump Polo Radiator GSXR-TBs ST170 inlet manifold and fuel rail Piper X dome filter Brand new alternator Brand new starter motor Scholar race engines modified and baffled sump Fisher Exhaust Manifold and Exhaust Can (sub 96db) MBE ECU and Loom (complete with wiring diagram) Produces 168bhp/145lb ft (print out to prove) Bits missing - Engine mounts Gearbox mounts Accelerator cable Fuel lines Coolant lines/hard pipes Prop Works perfectly, goes very well - check my YouTube channel (davebgsi) for videos of it working. Collection from Huddersfield only. I have no crane so bring a mate with you to lift it into a van/car. £1,700 ovno. Will not split. Link to comment Share on other sites More sharing options...
M444TTB Posted September 8, 2014 Share Posted September 8, 2014 Hmm tempting. Need to cosinder (money aside) what else I'd need as I'd be converting to injection. As i want to add a swirlpot hopefuly jsut a high pressure pump on top of my existing set up. Link to comment Share on other sites More sharing options...
Aerodynamix Ltd Posted September 8, 2014 Share Posted September 8, 2014 If you take off what what you have already Matt , you would have loads of bits to sell to offset it anyway so wouldn't work out at a lot for you , you've got the missing bits ................. I wouldn't have thought it would be here long ! 1 Link to comment Share on other sites More sharing options...
DaveB666 Posted September 8, 2014 Author Share Posted September 8, 2014 Hmm tempting. Need to cosinder (money aside) what else I'd need as I'd be converting to injection. As i want to add a swirlpot hopefuly jsut a high pressure pump on top of my existing set up. I'd you've currently got carbs then you'll have a lift pump so you just need the swirl pot and a high pressure pump. In fact I have my old high pressure pump that I'll throw in for you. Link to comment Share on other sites More sharing options...
DaveB666 Posted September 16, 2014 Author Share Posted September 16, 2014 Btt - offers? NB. The engine was fully mapped by Noble Motorsport and idles perfectly from cold as well as being a pleasure to drive in all temperatures and speeds. Link to comment Share on other sites More sharing options...
DaveB666 Posted September 19, 2014 Author Share Posted September 19, 2014 Provisionally sold. Link to comment Share on other sites More sharing options...
Recommended Posts