simon besant Posted April 27, 2014 Posted April 27, 2014 A friend of mine is after a pair of flared side panels for a Westfield Mick is not making any at the moment so wonder if anybody had a pair they are not needing
Aerodynamix Ltd Posted April 27, 2014 Posted April 27, 2014 It's on the list of moulds to make how soon does it need to be Simon . 1
Aerodynamix Ltd Posted April 27, 2014 Posted April 27, 2014 Possibly both , I need a set for my car and as the bodywork will be going back on soon I'll be looking at getting on with it although will be after Stoneleigh and Stoneleigh orders may delay it slightly .
Hellski Posted April 28, 2014 Posted April 28, 2014 No rush for me Julian as this would be part of my order with you for next winter in my quest to shed a few extra lbs from the car in fitting more carbon, so happy to go to the bottom of the list.
Aerodynamix Ltd Posted April 28, 2014 Posted April 28, 2014 Just had another call on these too so will aim to get on with it definately as soon as Stoneleigh orders are out the way , I have the necessary donor parts to work with so will be off to a good start .
CosKev Posted June 6, 2014 Posted June 6, 2014 Are these still in the pipeline to be made please? If so are the corners going to be rounded or square?
Aerodynamix Ltd Posted June 6, 2014 Posted June 6, 2014 Still in the pipe line , will be flared out top and bottom edges , rear will be long enough to be cut either vertical or following the scuttle/bonnet line . Front will be similar to the Westfield Tub , corners top and bottom will be slightly rounded similar to the Westfield tub sides .
dave_t Posted June 7, 2014 Posted June 7, 2014 I'm interested as well I'll keep an eye on this thread 1
Recommended Posts