Timmay Zoom Zoom Posted February 4, 2014 Posted February 4, 2014 Hi All, I am advised that one of my QED 450 Cams may have a little flat spot. Does anybody have a good set of these hanging around that I could take off their hands? Thanks all Tim
mitch46 Posted February 4, 2014 Posted February 4, 2014 For an xe? I've got two pairs I would be willing to sell Cheers Mitch
Timmay Zoom Zoom Posted February 4, 2014 Author Posted February 4, 2014 Hi Mitch, what condition are they in? How much would you want? I was advised that these are a bit old hat, but I like them. Cheers Tim
Arm Posted February 8, 2014 Posted February 8, 2014 Look out for some 450 v`s instead. A definate upgrade if you need to change anyway. 1
Timmay Zoom Zoom Posted February 9, 2014 Author Posted February 9, 2014 Thanks for the advice, what is the difference?
griffith500user Posted February 9, 2014 Posted February 9, 2014 Do you need to run pocketed pistons with these cams?
Dave Eastwood (Gadgetman) - Club Chairman Posted February 9, 2014 Posted February 9, 2014 Q450 and Q450V's are a mechanical profile, ie need mechanical followers rather than the stock hydraulic, they also need stiffer - usually double, valve springs and lastly, yes, pistons with deeper pockets.
Recommended Posts