Paul Gibney - Lancashire AO Posted January 26, 2014 Posted January 26, 2014 Taken roll bar off today , any idea how much I can expect to pay to get it re-powder coated ? Quote
Mark (smokey mow) Posted January 26, 2014 Posted January 26, 2014 My local place charges a tooling fee of around £50 if they need to change to a different colour from what they're presently using. Otherwise I'd expect to pay around £20 for a roll bar. Quote
Paul Gibney - Lancashire AO Posted January 26, 2014 Author Posted January 26, 2014 With the north south divide that should be about £2.99. Cool Quote
SootySport Posted January 26, 2014 Posted January 26, 2014 Yes, these sort of services cost a mint down here. The problem with powder coating an ARB is where the mounts clamp round it, the powder coating makes the ARB thicker. Quote
KugaWestie Posted January 26, 2014 Posted January 26, 2014 I got quoted £100 by my local powder coater - no thanks! Strange thing is they did a camcover for £24, so it seemed a very high price Quote
Mark (smokey mow) Posted January 26, 2014 Posted January 26, 2014 The problem with powder coating an ARB is where the mounts clamp round it, the powder coating makes the ARB thicker.i read the initial question as for a roll bar as opposed to an ARB Quote
pickmaster Andy Lowe Posted January 26, 2014 Posted January 26, 2014 I've just stripped my RAC roll bar which is a way of keeping the cost down Then had after adding a front hoop and roof bars onto it to make a full cage with side bars Had it powder coated for £60 the lot Quote
Pantherman Posted January 26, 2014 Posted January 26, 2014 I am taking mine in this week ,up to Chicago at Moseley hoping it will be no more than about £20 Quote
kev91 Posted January 27, 2014 Posted January 27, 2014 I am sure I paid around £20 last winter to have mine done. With them doing all the prep. Quote
Wile E. Coyote Posted January 27, 2014 Posted January 27, 2014 Give Triple S (Bingley) a call - when I was looking around they got the best reviews for ooop North. Quote
Dave Eastwood (Gadgetman) - Club Chairman Posted January 27, 2014 Posted January 27, 2014 I've used Triple S a few times now, not the cheapest, but the quality is so far better than anywhere else I've tried... Andy will be getting my cam cover and a load of other bits and pieces to do over the next few weeks or so. Quote
stewart pickles Posted January 29, 2014 Posted January 29, 2014 I am going to look at andys (tripple s)air con on way home ill ask for a price for a roll bar coating Quote
Paul Gibney - Lancashire AO Posted January 29, 2014 Author Posted January 29, 2014 Ta very much . Quote
stewart pickles Posted January 29, 2014 Posted January 29, 2014 50 quid for roll hoop or 100 for rac bar, thats striped,blasted and recoated Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.