pinto parts wanted

[ALLADDIN]

looking for pinto parts,  anything considered really as plans are far from finalized so what have you got left from upgrading or changing engine types 

[The Molestrangler]

Hi,

I have a Bosch distributor with amplifier and coil that I took off a 2.0 Pinto (£20)and a Bosch distributor and amplifier without a coil (£10) I also have a standard and heavy alternator bracket (£5), a used but good condition standard cam that you can have FOC, and a 30mm deep inlet manifold (Burton part no. IM 4272A) with water coupling (£50).

[blue ass fly]

Barkalarr is in the process of removing his pinto and is selling everything,bike carbs,ecu,manifolds,T9 etc

[mhc]

A friend has a complete 2 litre engine.

I can put you in touch

[Nick Algar - Competition Secretary]

I have a complete Pinto 2ltr engine, with carbs etc. first decent offer gets it.

[NDS]

Have a set of Twin Dellotro 40s on a Pinto manifold. The carbs have been rebuilt.

Neil Tel 01738 550005

[SteveD]

i have one attatched to a chain on the back of my boat

[Barkalarr]

Barkalarr is in the process of removing his pinto and is selling everything,bike carbs,ecu,manifolds,T9 etc

I've only got the Type 9 + pinto bell housing and shortened prop left.

[ALLADDIN]

Hi,

I have a Bosch distributor with amplifier and coil that I took off a 2.0 Pinto (£20)and a Bosch distributor and amplifier without a coil (£10) I also have a standard and heavy alternator bracket (£5), a used but good condition standard cam that you can have FOC, and a 30mm deep inlet manifold (Burton part no. IM 4272A) with water coupling (£50).

i have messaged you

 

A friend has a complete 2 litre engine.

I can put you in touch

where in uk mick ?

 

I have a complete Pinto 2ltr engine, with carbs etc. first decent offer gets it.

difficult given the unknowns involved    where in uk?  edit    i see where now    thats one long road trip !

 

Have a set of Twin Dellotro 40s on a Pinto manifold. The carbs have been rebuilt.

Neil Tel 01738 550005

as it happens carbs are down the list for the time being at least, thx anyway Neil.

 

I've only got the Type 9 + pinto bell housing and shortened prop left.

not required at this point thanks

[griffith500user]

I have an exhaust manifold you could virtually steal off me if you wanted to?

[ALLADDIN]

I have an exhaust manifold you could virtually steal off me if you wanted to?

not required i dont think but thanks for the reply

 

still looking for anything else that might come in useful tho   

[mhc]

Engine located in Nottingham.

[ALLADDIN]

i am still looking, its for a classic ford not a WF so ex manifold not required. 

any tuning (or even standard) parts considered .

 

since my membership will expire shortly i can then  be contacted on turbosport.co.uk

 

may even consider xflow parts