Search the Community
Showing results for tags 'sold'.
-
Keis Heated Waistcoat, marked up as XL?? but obviously not the case so I've placed a tape measure on for correct sizing. In perfect working order, complete with three setting heat controller and cables. No rips or tears, from non pet or smoking household. £95 posted to uk (approx rrp £180) I have advertised Keis heated gloves that could also be connected to this waistcoat if purchased together.
-
Keis Heated Gloves in very good condition. Size Medium although they do fit me, (size 9) Come complete with Two cables, one "y" cable to fit through your jacket sleeves (like you had when you were a kid) and a second fused cable to connect to a power source. Gloves have three heat settings, low, medium and high. £85 posted to uk. (also advertised elsewhere)
-
Keis Heated INNER Gloves in very good condition. Size Small although they do fit me, (size 9) and need ideally to be a close fit. Come complete with Two cables, one "y" cable to fit through your jacket sleeves (like you had when you were a kid) and a second fused cable to connect to a power source. £45 posted to uk. (rrp £80) (also advertised elsewhere)
-
Selling ad I have recently fitted a full roll cage. There is a very small stone chip on one of the covers, I’ve tried my best to photograph. £75.00 ono inc postage.
-
I bought this as a spare when I had my engine rebuilt at the start of the year, now not needed and in my way. Includes: Crankcase Crank Pistons Oil Pump Doesn’t include piston cooler jets or VVT solenoid in photo. £250.00 ono collection. I can stick it on a pallet and sort delivery at buyers expense.
-
Thermostat Housing: X\Flow, pre-X\Flow, Lotus Twin Cam & Raceline water rails - SOLD
Naranja_Al posted a topic in Parts for Sale
Recently removed from my car’s Raceline water rail. These are £100.00 plus delivered from Burton Power. £40.00 inc post.
-
1.8/2.0l Zetec/ST170 Aluminium Crank Case Breather Blanking Plate - SOLD
Naranja_Al posted a topic in Parts for Sale
New never fitted. £7.50 inc postage.
-
These came as a set with another item I bought and they aren’t required. Small hairline cracks in the casing - see photos. Other than that, they are in good condition. £30.00 posted.
-
As title, bought from Retroford at the start of the year but not needed. These retail at £125.00 plus postage. £50.00 inc postage.
-
2 x Compomotive CXR 13x7”, ET15, PCD 108mm & Centre Bore 63.4mm - SOLD
Naranja_Al posted a topic in Parts for Sale
No longer needed. Purchased in January 2025. 2 x Compomotive CXR finished in metallic grey 13x7” ET 15 108mm PCD 63.3mm Centre Bore £280.00. Collection preferred from Loughborough, I can post at buyers cost.
-
Wilwood 0.625” GS Integral Master Brake / Clutch Master Cylinder - SOLD
Naranja_Al posted a topic in Parts for Sale
Ended up with 2 of these as I tried to get the right size to meet my needs in terms of feel and engagement. Push rod has been cut down. £25.00 plus postage.
-
Wilwood 0.750” Integral Master Brake / Clutch Master Cylinder - SOLD
Naranja_Al posted a topic in Parts for Sale
Change back to . 0.625” MC when I changed to a racing paddle style clutch. Very limited use. Push rod has been cut down. £25.00 plus postage.
-
Removed from my car when I changed to Ferodo DS2500. These have done 1 track evening only. Purchased from Demon Tweeks on 25th October 2024, Part No MINMDB1382M1144 15.0mm when new, now 13.89mm. Slight lip on one of the pads. £40.00 plus postage.
-
For sale are my used set of Westfield Sidescreens / Sidedoors that I am selling as I will be fitting a full roll cage. These will fit a standard ZK/FW car, will not fit a Sport250 as the windscreen rake is different. £150.00 inc postage. Photos to follow.
-
Bought from another WSCC member earlier this year & selling as I am fitting a full roll cage. £80.00 inc postage. Photos to follow.
-
Removed from my car when I changed to Ferodo DS2500. 15.0mm when new, now minimum of 9.0mm. Part number MDB2905M1144 £20.00 plus postage.
-
Jenvey 2no SFRC3 Pico fuel rail mounting. £20.00 plus postage.
-
Removed from my ST170 as part of an engine re-build and return to Ford’s OEM breather setup. Baffled breather machined from aluminium 6082 and it includes a female M18x1.5 thread which is currently fitted with an adapter to suit 13mm ID rubber pipe. £60.00 plus post.
-
Selling as I have moved to a remote filter setup which allows me to use a larger filter. Brand new never used. £15.00 for the pair inc postage.
-
Removed from my car and sat in the garage. Includes LED main bulbs (not legal) and normal halogen bulbs. Usual age related marks, missing the bottom nuts. £40.00 plus postage.
-
These came with my car when I bought it. These will fit a Blacktop too. Open to offers.
-
Removed from my ST170 head. I think these will fit a Blacktop head too, although not sure. Open to offers!
-
Remove from my car post my engine rebuild. These are high impedance (14.5 ohm) EV1 connector injectors. Suitable for 231bhp at 3.0bar in 4 cylinder applications. I bought these direct from Jenvey in March last year and they have done less than 500miles according to my MOT history. Dale at Bailey Performance flow tested them and whilst they aren’t matched they do flow very similar & he was happy to map my car earlier this year on them. £150.00 plus postage.
-
Removed from my ST170 engine during re-build. Some minor scoring to the skirts, no pistons rings included. £50.00 plus postage
-
For sale an MSA roll bar built by a company called playskool (well known for roll cages etc) it would suit anyone 6ft plus. £255 collection only worcs (now removed from car) thanks - will advertise elsewhere if no ones interested.
