Search the Community
Showing results for tags 'dash'.
Found 12 results
-
Hi carbon fibre dash panal bought from aerodynamix for our wide body project 3 years ago ,come to use it and its to narrow it's possible a narrow body dash please see the dimensions in the photo. Sat in the garage in a box for 3 years could do with a polish. £70 posted less than I payed but has to go. Thanks chris
-
Clearing out after the build need the space. I can bring the dash to shrewsbury in a few weeks time if that’s closer for pick up. All prices include postage Mazda sdv dash board £40 Ono reverse and fog light £15 ono Front indicator stalks £20 Ono mx5 1.6 water pump and block gasket £20 (new)
-
I'm just at the stage of fitting my dash and have 1 more item to add which is the Ctek battery charger connector which I'm going to mount on the LH side of the dash, near the edge. Just checking before I fit this, is there any chance this could prove a problem with IVA? I can't imagine it would but though I'd ask the team.
-
Ok team, just finished getting my scuttle to fit onto the chassis as its currently got the rear-panel, and side panels fitted to locate the rather complicated cut-out for the fly-by-wire throttle. Have my dash fitted out with some of the switches etc, following AdgeC lay-out, without the AIM dash in it yet,and have just offered up the dash panel to roughly line up the edges. I also used a straight line to bend the 2 welded on brackets, to help support the dash, is that correct? I have worked out that the crash pad which goes around the outside must then cover the bolt's holding the dash to the scuttle, and following other builds am going to order the M4 clips https://www.amazon.co.uk/Speed-Fastener-Chimney-Tapping-Metric/dp/B01MCYOL7I/ref=sr_1_4?s=automotive&ie=UTF8&qid=1521243951&sr=1-4&keywords=Metric+Screw+Lug+Spire+Clips Have not seen anybody really detail how many screws are generally used to bolt the two together, so looking for advise on how many to use? I'm then assuming that the crash pad is fixed using hook & loop tape to hold this in place? I like the idea of being able to drop out the dash if needed by just un-screwing after removing the crash pad. Have a bag odd button head M5 screws/washers/nyloc's x10 sets from WF, but that seems like a hell of a lot of LARGE fixings so am planing to switch to M4, and that I think nuts would be a b***h to un-do if I ever needed to remove
-
OK team, a bit more advice please. I'm sitting in the garage with a nice cup of tea, and Jam Steam Sponge pudding looking at how I'm going to mount the fuse boxes and AIM Dash expansion. I going to follow AdgeC's brill idea and mount them on the cross rail just above the drivers feet, but taking his advice on the front of the rail, further away form the scuttle back-line. The bit of aluminium sheet I have is not quite as tall as AdgeC's so I'm thinking I can mount the expansion unit on other side of the steering shaft, but could mount horizontal or vertical. Anybody got any thoughts on this?
-
I'm very happy! what a quality bit of kit it is!
-
I am after a contoured dash preferably in blue but can always recover, ?
-
As per the title, does anyone have one of these they've taken out to upgrade to a carbon dash? I'm not worried about the condition as I plan on "doctoring it" a little anyway. Cheers, Andrew
-
After a winter upgrade I have lots of parts for sale, need the garage space and the funds to pay for upgrades :-) All parts located in Glasgow but may be able to find somebody to transport down to Stoneleigh, otherwise P&P will be at cost. Ive added prices and RRP as a guide but no idea what to be asking, if it's too high then make me an offer, if it flies off the shelf then I know its under priced :-). Ask as many questions as you wish, I'll answer to my best ability. Discs, calipers and pads (GC) £85 (RRP £175) Cobra Roadster 7 seats (AS NEW) with Willans red 3 point harnesses (GC) £300/pair £50/pair Slight fray where the harnesses passes through seat slots on head rest Roll bar (VGC) £75 (RRP £154.03) Slight scratch on top bar at back of headrest Dash - grey (VGC) £70 (RRP £139.72) 7" headlamp units, black with chrome surrounds (GC) SOLD Suspension - Spax gas coil overs (VGC) SOLD Air filter and blank mounting plate (never fitted) SOLD Silencer heat shield (VGC) SOLD Rear arch stone guards - carbon affect (never fitted) SOLD Wet weather frame (VGC) SOLD Westfield interior carpets - grey (never fitted) SOLD Full range of pics here http://s124.photobucket.com/user/rooster7358/library/Westfield/Westfield%20bits%20for%20sale?sort=3&page=1
-
Moulded dash for a Mazda SDV to use the MX5 light cluster. Brand new and unused. Dorset
-
Acewell 260 speedo , brand new in box never fitted , see link for details below . No reciept but brand new in box , £91.99 plus postage new , yours for £50 posted to uk adress , will send abroad at cost for insured service . http://www.acewell.co.uk/Acewell%20Speedometers/ACE-%202xx/ACE-260.htm?action=full&id=30
-
As my Narrow car is now up for sale I have a Brand new, uncut, never used and still in it's delivery packaging Carbonmods dashboard for a narrow body. This cost me £125 new from Carbonmods this time last year and was one of the last before they stopped making them and has sat on top of my wardrobe for the last year in it's delivery packaging so this really is as new. Your's for £100 (no offers) + £10p&p Mark PM or email me at wsccessex@btinternet.com
