Search the Community
Showing results for tags 'Carbs'.
Hi guys, Really need some help. I have stripped the fuel tank out to fit a new roll bar. Also had the engine out to fix a gearbox leak. Put it all back together and when I turned the fuel pump on fuel was squirting out everywhere around the carbs. Thought it was some loose jubilees etc. checked them and all ok. Turned the fuel pump on again and managed to pin point where the fuel is leaking from, pic below. Could it be fuel pressure? The carbs weren't leaking before. There's a regulator prior to the carbs, looks pretty old as does the fuel pump. Just a bit lost as it was all fine prior to being taken apart. Cheers
drummerdrum_uk posted a topic in Parts for SaleWeber 45 DCOE, 45mm 20xe Inlet Manifold, TPS and Ramair filter. Everything you see in the first 3 photos. Has 150 jets fitted and also has 165 jets that will come with it. Had them setup by Peter Baldwin on standard engine, Mbe Ignition and Sbd Manifold peaked at over 200 but held 196Bhp on his rollers realistic figure is around 185bhp as his admittedly run high. They will need a re-tune as they have been on and off a few times. £450 Plus Postage Mbe 967ig Ran with the Carbs still fitted in car but will be removed shortly. Has a complete loom as well. Will need tuning to suit your engine bu has a good base map for a standard engine £250 Plus Postage SBD Weber 48 DCOE Inlet Manifold (last 2 Photos) £60 Plus Postage Have a 52mm inlet and 52mm Jenvey throttle bodies to sell very soon has fuel rail, Cable linkage and trumpets for sale soon, also untested go tec pro x ecu for sale as have had a change of plans. Happy for Collection St.ives Cambridgeshire