Search the Community
Showing results for tags 'Blue'.
Found 7 results
-
I picked the job up again this afternoon, and decided to fit the switch into the dashboard. Firstly I chose my position Then I cut away the vinyl and foam very carefully, followed by drilling a series of holes to form the square hole After some tidying up with a file, the switch is in Whilst out collecting some last minute bits today, I picked up a can of top coat paint. I sanded one of the primed mirrors down with 800 grit wet and dry, and gave it a couple of coats. More to follow - but thats it for a few days now!
- 9 comments
-
- 1
-
-
- Electric Mirrors
- SDV
- (and 2 more)
-
After wanting to build and run a Westfield for over 20 years this past year I finally got chance to realise my dream but it is with a heavy heart I have to consider selling my freshly build Westfield. I have been offered a very nice 997 at a price I just can't resist and having known the car for sometime I cannot let this pass by if this sells. For anyone who is interested here is a link to the build thread : Build Thread All purchased new from Westfield June 2018 and the car has now covered 1000 miles with very very little in the way of teething problems. The car has completed one trackday at Blyton Spec : Registered 1/3/19 Electric Blue bodywork 2.0 Blacktop Zetec on Omex throttle bodies and fitted with a raceline sump. New style FW bodywork with no rear plate recess Sport turbo seats black with blue piping Mazda LSD Pro race 1.2 wheels 7" fronts, 8 " rears fitted with Nankang NS-2R's Westfield Hi-spec brake upgrade new front pads just replaced as the EBC's were not to my liking All LED lights front and rear AIM MXS Strada 1.2 Dash with AIM VIM kit Carbon - Dash, front wings, mirror covers, rear arch stone chip covers, diffuser and cage hole covers Genuine Aerocatch bonnet catches OMP Trecento wheel with quick release column TRS 4 point harnesses 8 channel Freewheel setup with wheel backplate (although I am only using 4 of the channels MSA safety devices cage Only ever seen Vpower fuel through its very short life ! Protech Trackday adjustable dampers Perpsex side wind deflectors Full silicone hoses. Full Geo and corner weight setup at Playskool motorsport less than a month ago. The only addition I was going to consider is some stiffer rear springs as if your lardy like me when two up the car feels way to soft at the rear. Oil changed for Quality 5/30 fully Synthetic ester oil around 600 miles. I have another 5 litres of 5/40 and a few oil filters that will come with the sale All bodywork and wheels were machine polished and had a Gyeon ceramic coating applied at the end of the build making it very hydrophobic. This kit was built with the intention of me keeping it many years (or until I could afford a 997 911!) so everything has been done to the greatest of my ability and with no corners cut on the spec I wanted, It really saddens me to even post this up but the wife has signed off on a 911 and knowing her mood swings I need to grab this by the balls. Any inspection welcome - viewing can be arranged most days or evenings - You can contact via phone or via PM on here.
-
58 Plate MAZDA MX-5 Roadster FOR SALE Very good condition inside and out Blue metallic paint Cloth seats Black piano finish dash board Hard top convertible ONLY 20,000 miles on clock FULL SERVICE HISTORY MOT until June 2014 Taxed until FEB 2014 Mechanically sound Tyres very good condition Awesome car, great handling rear wheel drive fun!! Even better with the roof down!! Looking for a quick sale as my wife wants a 4x4 before winter!! Only looking for £7500 no offers please..... This is a winter bargain!! Please contact me on 07906 957150 or dwstudios@hotmail.co.uk Dean
-
58 Plate MAZDA MX-5 Roadster FOR SALE Very good condition inside and out Blue metallic paint Cloth seats Black piano finish dash board Hard top convertible ONLY 20,000 miles on clock FULL SERVICE HISTORY MOT until June 2014 Taxed until FEB 2014 Mechanically sound Tyres very good condition Awesome car, great handling rear wheel drive fun!! Even better with the roof down!! Looking for a quick sale as my wife wants a 4x4 before winter!! Only looking for £7500 no offers please..... This is a winter bargain!! Please contact me on 07906 957150 or dwstudios@hotmail.co.uk Dean
-
SOLD: WESTFIELD Sport 2000 - Factory Built 2.0 Zetec only 9900 miles (1998)
Gareth001 posted a topic in Westfields for Sale
Immigration forces sale of my very much enjoyed Westfield - afraid shipping to USA is not practical! Factory built Navy blue Westfield Sport 2000 SEIW – 1998 R reg with nice car related “R200OWF” license plate, 2.0ltr 16 valve Ford Zetec engine producing 170bhp giving 0-60 in 5.3 seconds. Twin 45 Webers, with Westfield 4 into 1 side exit exhaust providing a very nice exhaust note Garaged and covered by full Westfield indoor cover by previous original owner and by me for my 6 years ownership, only driven during nice weather, never in the rain – but does come with full wet weather hood, doors and full tonneau cover. 9900 miles from new and as factory built no donor car parts used – all brand new when built 5 speed ford MT75 gearbox with quick-shift remote link, independent all round suspension with adjustable Spax shock absorbers. Disc brakes all round with Westfield alloys mounted with Toyo P600-F3 205x50x15 with 5-6mm tread all round MOT until July 2013 (can have fresh MOT done if required) - Tax until end of October 2013, so start your ownership with a summer full of fun 2 sets of keys and Thatcham 2 immobilizer Call me on 07720 707904 or email Gareth001@hotmail.com Offers around £8250 Only slight fault is a rattle has appeared from gear leaver from worn bush in quick-shift linkage over last few days – doesn’t affect gear changes in any way but I haven’t had chance to fix. -
Several months ago I bought a pair of electric mirrors and a control switch on E-Bay They are from a MGF (Rover) So yesterday I decided to have a go at getting them sorted out and fitted. The first job was to whip the battery off the Westy. I bought the battery inside and sat at the dining room table and got stuck into working out the wiring on the mirrors and switch. This didnt take too long with the help of google. Once I got both mirrors 100% operational, I labelled up all the wires and also made a seperate note of connections. Then I took off the cover surround and mirror glass After a quick clean up inside the housing, I gave them a rub down with 400 grit wet and dry The next process was to mask up the rubber shrouding covering the mounting lugs, and give them a coat of primer
- 1 comment
-
- 1
-
-
- Electric Mirrors
- SDV
- (and 2 more)
-
A bit of fresh air was needed today, so I used some fine cutting compound, followed by Autoglym SRP and finally some wax. Three coats of each left me with this Then I cleaned the mirror glass and applied some Rainex. I also cleaned the plastic glass surround with some trim detailer And finally I re-assembled the mirror The windscreen pillars need a small amount of modifying. I drilled out the fixing holes to enlarge the diameter of them. This allows the mirror to be rotated slightly to make it more vertical as without this it points a little bit too much skywards. You will also see an additional hole that I have drilled to feed the cables through
- 3 comments
-
- 1
-
-
- Electric mirrors
- SDV
- (and 3 more)
