Search the Community
Showing results for tags 'Air Temperature'.
Found 1 result
-
I am after advice as to where to locate the Air Temperature Sensor (ATS) as part of my Omex 200 upgrade. I have Weber DCOE 40 carbs with K&N air filters fitted. I had assumed that I would drill a hole in the back plate of the air filter and poke the ATS through. However, now I look at it, there does not appear to be enough room to do this without the ATS and connection fouling on the carb body. The only possible location is at the bottom centre. Just wondering if anyone has modified their K&N air filters and, if so, would mind posting photos of how that was achieved. If its not possible, would I be better off getting a different style of air filter where there is a single backplate for both carb bodies as I am thinking there would be more room between the carbs on that sort of air filter. Another thought was to just mount it separately but somewhere were the temperature it records is going to be as close as possible to the intake temperature. Thanks in advance, Bill
