Leaderboard

It lives .... And now it's officially a Red Top

Another busy month.. New radiator and oil cooler fitted just in time too remove the engine and gearbox which are are now out, as is the rear axle. Fitting new pistons with a re-bore, new shells, balance etc. The gearbox has a slight leak on the main seal so that's being replaced and I'm fitting a breather just to be safe. The axel had badly fitted bracing (very poor welding that resulted in some oil weeping) so I've thrown the case away and invested in a replacement along with a new 4.1 diff and a full set of bearings and seals... The exhaust was a bit of a pig to fit and required some re positioning of the engine and some stressful cutting of the bonnet. This should give good gains in booth power and torque along side the other engine work that I have carried out... To improve the rear I have fitted some graphics (well I will do once its all back together) and a couple for the sides of the bonnet... Nearly at the finishing post (for this year anyway....)