Leaderboard

Wow, I best have a go at predicting the lottery numbers next

Tillet give good service , no doubt but so do JK, it's what you would expect from any small UK supplier. You will need the additional base if you are fitting to seat runners to give the extra rigidity. If you are mounting direct to the floor then the bulkhead brackets is all that is needed. When ordering with JK you will need to tell them which fixing method you are going to implement as the bases are bonded to the seat, they are not screw on bases.

The worst thing about SV is he's getting better still! The guy deserves everything he has won. If the likes of Hamilton and Alonso really still believe they are on a level he isn't they need to think again.

Did you watch it or not? If you did, why, if it's not worth watching, if you didn't how do you know it's boring?

Boring boring F1. Not worth watching cause we know Vettel will win. Just like when Schumacker won every race- too predictable

Excellent day out. Thanks to Matt for organising and big thanks to the guys at NMS and that after working their socks off, the hospitality, to then donate their fees to the charity.

Thanks Norm, that's my understanding. Like most things the quality is about attention to detail. Getting all the air out and consolidating the material layers is what matters so the ratio of carbon to resin is kept as high as possible. I put a lot of effort into working the resin into the material first and then with a hot air gun and bristled roller really getting as much of the air out as possible. I repeat this for each layer and then using the final layer of peel ply (not shown in the photo above as it covers everything) really working with the roller to consolidate the layers. As for it being amateur; one, isn't that what kit cars are, and two, I'd put mine alongside a factory built car any day when it comes to quality and attention to detail.