All Activity

just to give you an idea; this is the midilite kit from rallydesign with 15" wheels

The spec is amazing! What a fab Westie that is 👌

Having tried and miserably failed to keep up with David around the highland roads, I can confirm that it is one seriously quick car! But not only that, it is also of impeccable build quality. Has to be of the best out there.

308hp & 300lb/ft torque, weighing just 600kg (1/2 tank) Resulting in around 520hp per ton. Ford 2.0 ecoboost engine. (chain driven) hybrid Turbo. (Capable of 380hp) Uprated turbo actuator. GFB adjustable (full re-circ/atmosphere) blow off valve. RadTec radiator and intercooler package. sport 250 rad duct cowling. 3” exhaust. Westfield carbon fibre 6” silencer. Thermo-Met custom exhaust insulation. Ford Mustang inlet manifold. Ford Mustang engine cover. PowerTorque RWD baffled sump. SCS Delta GDI4 stand alone ECU (fully mappable. SCS closed loop lambda control. Ford Duratec 85 degree coolant stat. Setrab oil cooler. Setrab oil cooler fan. (Controlled via AIM dash temp info) Mocal billet remote oil filter with integral 80 deg thermostat. DanST billet oil take-off plate. High flow torques hose fittings with PTFE hose on oil and fuel lines. Millers race oil. Odessey battery. Mazda MX5 mk3.5 5 speed gearbox. Westfield sport 250 Helix clutch with billet pressure plate. Vitesse concentric hydraulic clutch conversion. AP racing clutch master cylinder. 3.62 Ford Escort cosworth LSD. Custom made long range fuel tank (38L) top mounted filler, and anti surge baffle-ball filled. (250+ mile range) External Swirl pot dual pump set up - Walbro 392 HP pump. Walbro 395 lift pump. Focus RS mechanical DI pump. Fuelab billet fuel pressure regulator with gauge. Fuelab Billet HP fuel filter with replaceable filter. Billet pre pump filters for both pumps. APS alu AN fuel hose and fittings. ATL 0-5v fuel sender probe. (No moving parts) Siltech racing front 4 pot lightweight brake package Including custom super light front vented AP discs with aluminium bells. Genuine VAG rear calipers (handbrake retained) Westfield grooved rear discs. Tilton adjustable brake bias bar. Dual AP racing brake master cylinders. Braided 3AN Teflon brake hose throughout with APS stainless steel fittings. Motul RB660 brake fluid. 2.4 quick rack. Siltech Racing super-wide front wishbones. Siltech Racing Micro adjustable (rose jointed) rear wishbones. Siltech racing front and rear adjustable anti-roll bars. Westfield alloy front uprights. Lightweight billet alloy front hubs. Westfield alloy rear uprights. Protec shocks, re-valved and calibrated by Procomp motorsport. Faulkner springs. NMB rose joints used throughout. Force racing billet 3 piece wheels Weighting just 3.8kg! 13 x 8 13 x 10 Avon ZZS tyres. (Nearly new) Caged FIA spec full cage. Longacre rear view mirror. AIM XMS strada digital dash and sensors, linked to SCS ECU via Can-Bus. BlinkStop wireless steering wheel buttons (programmable Indicators/high beam/horn) Fan override (on) switch. Push button start. TRS 3” harnesses. OMP 300mm wheel. Racetech quick release system. Dual USB power socket LED lights all round (inc headlights) Gerbing heating clothing power socket. Lightweight race ZK bodywork in ford stealth grey (gelcoat, not painted) Currently professionally wrapped with Hexis ‘Wasabi green’ metallic. Extra wide rear arches (305mm) Carbon nose cone Carbon NACA duct air intake. Carbon chassis/interior panels. Carbon flared side panels. Carbon front splitter. Carbon headlight pods. Carbon indicator housing. Carbon boot cover. Carbon diffuser. Carbon aero+ wide front wings. Carbon aero screen. Carbon kick strips. Carbon dash. Carbon tunnel top, rear and side interior panels. Carbon chassis & cage trim. Carbon cage protectors. Carbon gear knob. Audi TT gear surround. OBP ‘dark matter’ passenger foot rest. JK composites seats. (Both on runners) Built for the Ultimate Road and Track Experience The goal was simple: create a car that’s perfect for road trips—capable of being driven to the track, enjoyed all day, and then comfortably driven home. By focusing on weight reduction throughout the build, the car retains exceptional handling and delivers a superb driving experience. Countless hours of development and fine-tuning on the dyno have resulted in a car that’s incredibly fast yet remarkably smooth and easy to drive. It cruises effortlessly and responds with precision, a testament to the quality and attention to detail invested in the build—truly second to none. In 2019/20, the car underwent a full, chassis-up ‘nut and bolt’ rebuild. During this process, the chassis was heavily modified and reinforced, especially around the rear end and differential, to handle increased torque. Additional strengthening was applied to the front suspension area. Lowered steel floors were installed, and the entire chassis was shot-blasted and powder-coated in satin black—effectively making the car like new. The track width is approximately 160mm wider than a standard SEIW, contributing to its enhanced stability and performance. The cars had covered 14,500 miles since. Registered on a Q plate, the car is exempt from emissions testing at MOT, meaning a catalytic converter is not required. This also provides greater flexibility for tuning the fuel and ignition system to achieve optimal performance. The car comes in 2 colours! The fibreglass is ford stealth grey (see pics) which is currently professionally wrapped in stunning Hexis ‘Wasabi green’ £27k I’m Happy to listen to feedback on the price, I just haven’t found anything to compare it to so it’s been difficult to value. But it’s quicker than a 620r and half the price

Same as me then. I thought mine was further back but just looked and I guess it's about the same. What differences have you noticed with the new stick?

@Trevor Little (Trevturtle) - Treasurer please find a roll for John and let him know what he'll be doing. @jmathews thanks for stepping forward.

Yellow things from curborough.... how about this 😜 ..... sorry Greg!

Everything is for sale This car is road registered on a q plate Duratec 2.0 engine Seiw The car is a 1995 which had a rebuild in 2013 new chassis bodywork from westfield Damaged on the front passagers corner Unrecorded damage The car will be 30 years old in jun this year so if anybody in france or any other country is interested i will sell you the whole car or bare chassis with the v5c as over 30years old makes it easier to register Drop me a pm if you interested

It's a type 9 on the back of a zetec.

Standard width I also have a green pair aswell in nice condition

I'm laughing so hard here, you seem to spot things mere mortals can't!

Your less Dick Mayo and more Dick Emery!

What gearbox is it? May be the angle but it looks further forward than mine. My gearstick isn't particularly long but works well enough despite that.

What size are they

Lengthened my ridiculously short gear lever

Pricey, but I really recommend ram mounts ball mounted phone holders - rock solid once mounted

Yeah, they're nearly a thousand cheaper than that direct from Cobra at the moment. That's a lot to pay for Westfield embroidery.

Towel 😁

Thank you, Captain and Mr Carrot 👍 Apologies for the lateness, however, my log ins to the land of all that is WSCC are less frequent.

Hi @TJB22 and The car looks great! As another 2.1 Pinto owner, I would love to catch up with you and your car at the Malvern show.

Scotchguard spray is another excellent water repellent, any supermarket or shoe repair shop.

Wow, thanks for the replies. I'd not thought of most of these things so I'm really glad I did this thread. I'll be sure to check the wipers tonight when I do some work on the car. If I need I can pick some up from Halfords as I'm going to try to find a phone holder for the trip from there too. As I say I have the full hood so I'll use that when it rains but I'll practice putting it on tonight too. I have maguire's version of rain X so I'll put some of that on both sides too. Thanks for pointing that out as I'd forgotten about it. I have a heater and heated screen so hopefully misting will be controlled as best as possible. Great idea re the carrier bag for the side doors. I'll experiment with that too and see what I can do to prevent water coming up. The air filter is fully under bonnet so that should be OK. It's just the battery and timing belt directly under the bonnet openings that's exposed. Just researched Wojtek. That's a fantastic story, thanks for pointing it out. I'll be sure to find the statue. My nerves are abated with your help! Still on the lookout for a hotel around the lakes (ish) if anyone can recommend?

Submit it and we’ll see, but I should warn you it may be used in evidence against you as well.

Westfield prices are spiralling up faster than my council tax! 🤪

Drivers seat Has a very small nick in the where its been rubbing againts the tub