All Activity

especially if the V5 gives no indication of emissions.

More car p**n - finally decided to treat myself to some satin black 13” CXRs. Good service from R&R Alloys. Now I just need to get the tyres…

Pinto engine and chassis mounts Came off narrow chassis, (don’t know whether the same on wide chassis ) in very good condition Stamped on engine mounts PL2B and PR2B Stamped on chassis mount 2837 £60 the lot

Hello All, November is approaching and the meet is this Sunday, 2nd. I'm back from my adventures so plan to be there. As mentioned last time I need to finalize numbers and a date for the December Christmas meal meet. I'd mentioned the 6th but unfortunately that looks to be out for me so it needs to be the Sunday, unless that's generally difficult, it so we could try for the weekend afterwards. I'm still looking to hold it a The Vine in Wombourne. I need thoughts numbers pretty quick to be sure of making the booking. see you Sunday Thanks Rhett 7pm, 2nd November at the Dudley Arms, Himley. DY3 4LB.

Carbon effect dash panel Has steering column and fixing holes pre-drilled (9 equidistant) Still in protective cellophane and unmarked Trimmed to fit wide chassis scuttle £60

Do you have a photo of your gear lever showing its position and how cranked it is? Can the reverse lockout still be operated with a bent lever or does it become awkward? Cheers, David

The V5 may differ from the MoT testing equipment figures though. Most confusing.

Bonnet mould having release coats applied, and between coats getting templates made up for the cloth layup. Thinking of doing a 0/90 spread tow for the scoop, and twill for the remainder. 45/45 biax mid layer, and coremat for extra stiffness. Haven’t done weight calcs yet, but should end up much lighter than the grp bonnet, and of course be much stiffer. Haven’t decided on vents as yet, but will make these separately and make them into a feature. Using the plug for my templates, and will be doing an infusion.

It is, even Westfield gave up on offering their old green in the colour matching service they had. From memory, the chemicals used in the pigments for the old greens have been banned from use for years now, amd without them, you can never get a true match.

Very true, though just keep in mind that paint and gel coat do reflect light differently, so some colours don't math quite as well under all lighting. (My Electric Blue looks radically different under electric light compared to daylight, and under daylight, a bright, intense, high summer sun, looks completely different to a weaker winter sun. (Even where colour temps should be similar).

I don't have any paint. Just the original green gelcoat. So matching is much harder. I work in the yacht coating industry and have had a couple of gelcoat repair specialists look, and they both said it would be a very tricky match. Painting the car would be an easy option, but then the original gelcoat would be lost forever.

Me too! Thanks everyone for the explanations.

Yes - I am planning to re-paint the wheels, if/as necessary, depending on the final design choice.

to keep some green in the mix there is the 7UP or Falken Tyres liveries.

Just generally with wraps, it very much depends on your expectations, quality of finish wise. If just looking for a race car finish standard, or "10 yard" finish, where you can't see all the imperfections, then as long as there are no raised sharp edges, you can just go over the top of moderate condition bodywork. But if you're wanting it to look good when stood next to it, surface prep is everything - it basically needs to be almost as flawless as it would be for a paint job, so sanded and filled where necessary etc. Thus if you removed it, it would either need re-wrapping or painting. Not sure how the JPS scheme would go with flared arches, as they would cut through the gold pin stripes on the side of the car? It can look great on a Westfield though!

The V5. (Again, unless on a Q) The V5 is the "law" for that car, what it says on it, goes, as far as emissions are concerned and the MoT. All the other documentation is just to get you to the IVA and V5 stage, so great to have in the cars history, but not vital.

Me too! (the pre-register for the engine, that is.

Narrow chassis windscreen fillet in blue, used but good condition £20

Paint matching is incredibly accurate these days if your existing paint is scanned then that's exactly what your get i can understand you wanting to wrap there's a gulf wrapped car that I keep seeing at mk open days even has mud on the print looks awesome it's done really well seems a popular wrap unless it's the same car.

Must go well then looks great

Had a little bit of pampering done over the past two days. Nothing crazy, just a good once over. There were a few super minor marks from prior to my ownership, and I like my cars to look as good as they go. Mission accomplished. Very happy.

Thank you. That’s the first time I’ve heard of that being done. Every day’s a school day.

It wasn't as bright and sunny as forecast, but we had a good blat round and got my oil warm ready for the annual oil change!

Have a great day @Jim.Mottram 🍺🎂

If you do JPS, be aware that you will have an overwhelming desire to either get your existing wheels refinished to gold or get new gold wheels, so factor that cost into things.