All Activity

Will crack on then lol

These will increase in price 1st feb.

@DannyTGS have a drink and enjoy, no run out from me tomorrow 😁🍻

The pads in your second picture are made by Lusomotors, https://lusomotors.com/ Send an email to Ernesto (Luso owner), he'll be in touch with you.

Can anyone help? I’m after some seat pads as per the ones in the pictures for my new “made to fit” carbon seats, I’ve found some from the main manufacturers of GRP and carbon seats but they are very expensive. The seats come with EVA foam pads but I’m after something a bit better finished as per the photo with the quilted pads. Thanks in anticipation.

Reporting for duty…. @IanD - I’ll get one in the post to you 👍🏻

@Julie Hall - WSCC AO Representative Have you decided on a New Years Day drive out or not? If not I might have a couple more drinks is all haha

Both pairs are sold

And one my son got me.

Please note date change for January’s get together from 1st to Thursday 8th. Usual venue, the Crown Bridport DT6 4AX from 19.30.

Calling @Mathew Vernon - Membership Secretary to the thread please… 😎

Morning All I have only just realised That I haven't received my Calendar yet. Are there any left that could be sent out. It will by my first year of missing it since we started doing them. Thanks Ian

Have a great day @Jock & @MarkBishop 🎂🍺🎂🍺

Got this for Christmas

Received refurbished shocks for my track Westfield from https://www.thunderlane.eu . I bought the car in 2018, with a few years of history before that, and I think the shocks had never been overhauled. They got new bearings, thinner valves for a lightweight car, new bump stops, etc. They were dyno tested (I don’t understand those diagrams at all 😕, but I was assured they were matched in pairs). I’m really curious whether I’ll feel the difference. When they were “new” ( I mean after few seasons in Westfield Cup NL , and on some endurance challenges (got few broken wishbones with that car ) , even on the softest settings the car was quite darty. Hopefully this effort and the expense — will be noticeable 🙂 Edit – oh, and I had my springs measured: front (RED) 60 N/mm, rear (BLACK) 40 N/mm. Not sure if this is right or wrong, but at least I now have a baseline if I learn which way to go softer or stiffer at the front or rear in the future.

Be good to see you if you can make it, Danny, but understand if not.

I’ve been driving two Westfields with the 2.0 Blacktop Zetec for quite a long time (one of them purely track-focused). This season, however, I started not with a Westfield but with a other Seven-type car — an MNR Vortx with a Honda CBR1000RR bike engine, which is even more extreme, I’d say, compared to a Blackbird. They are both (CEC and BEC) very different beasts. There’s a nice piece of material comparing CEC vs BEC here — worth watching calmly, especially the part about weld cracking 🙂 (link below). It’s not something that happens immediately or all the time, but loosening of supposedly secured nuts — yes, I’ve experienced that myself. In a BEC, the engine is stiff-mounted to the chassis, with all the consequences. What is not mentioned in this material, but what I know from other BEC owners, is that the engine effectively becomes part of the chassis. In the event of a collision, engine damage is quite possible — I personally know a case of a cracked cylinder after a relatively small crash. With a BEC mounted on rubber or poly bushes, this is not an issue. On the other hand, there is roughly a 100 kg weight saving with a BEC engine–gearbox combo. The lack of a reverse gear is nothing pleasant in a BEC car. Even on track only — we all have had, or will have, a spin. It’s really worth having a proper reverse. With a BEC it’s basically not possible. Some mention a mechanical reverse gearbox, but others say it takes around 10% of the power, and an electric reverse is of little use. So if you spin, that’s the end of the session. Even in the paddock, you usually need at least one other person to move or prepare the car. But — you get a sequential gearbox “for free”, and that sound at 13,000 rpm… well, that really gets you hooked. I still don’t know which of these cars is actually faster. The MNR also has better suspension and chassis, so it’s even harder to compare. The Westfield has 195 hp but roughly twice the torque, while the MNR has similar peak power, delivered much higher in the rev range, and with almost half the torque. I don’t know how it is with the Blackbird, but in the CBR1000RR there is a slipper clutch — a great thing !!! It can save you more than once from a spin when you downshift too early under braking. Well, best to try both

Tight space to work there… hopefully my pressure switches will keep working, so I won’t have to break my fingers trying to fit something similar 🙂 well one is with hanging pedlas so easier access.

@DannyTGS well done for fixing your brake lights after @Ian Kinder (Bagpuss) - Joint Peak District AO commented on them on Sunday 🤣 he will be pleased to know I’ve put new bulbs in Becky’s car as well 😜 so that just leaves @Julie Hall - WSCC AO Representative !!!! Has Glen fixed them yet ? I should hope so …. his got more time on his hands than the rest of us 🤔

New Years Day meeting at the Motorist, Lennerton Lane, Sherburn in Elmet, LS25 6JE on.....................New Years Day surprisingly. Anyone want to meet up? I'll be "Westfieldless" as the mot ran out before Christmas and I'm SORNing from tomorrow. More on that to come.

Great pics @Ian Kinder (Bagpuss) - Joint Peak District AO, what was your reply to Darren? no apology required, it was great to see you and definitely come again Great to see you have taken evasive action against the cold meaning to could make the 1 hour journey to meet us in comfort, well sort of comfortable, in Westfield terms😁

Made by me Slight seconds £350 I have one maybe two pairs Drop me a pm if your interested pictures a Can be sent or serious buyer drop me a whatsapp

Thanks @Ian Kinder (Bagpuss) - Joint Peak District AO

Busy day in work on Thursday the 8th so depends if I've had a rotten day I'll most likely lick my wounds n stay at home but if I'm winning Thursday I'll probably make it out

Ignore the red tape, Didn't have any black, But ill thread it through loom corrugated section once I get some from work, but now I have reactive brake lights lol And while I was at it, little extinguisher install