All Activity

Just a reminder that if you have my bank details, can you pay your entry fees, please. I will PM the details to those that haven't been with us recently!

Not tempting fate here but.......I have 2 spare sets of jump leads free to anyone who wants a set. I put it on here as I can bring them to Kendal in june. "First come first served"

It will be good to see you there. My westfield is more or less bog standard so you can see what is required with respect to rules. Double spring on throttle, wheel studs thread showing on wheel nuts , yellow tape on battery earth, little sticker showing off direction for ignition key, yellow tape or sticker showing tow point front and rear, timing strut, mot, tax, insurance and number plates. Roll hoop with bracing as minimum, height of hoop must be such that line from top of engine to hoop top would go over your head and your head can't touch the hoop. Hoop has to be specific diameter and thickness and welded. Seat belts have to pass mot.

I wonder how many of us are westy and tvr owners? 2 westy and 2 tvr family here !😁😁

And you might have a type 9 box in the mt75 chassis - so can’t go on that 🤣

You do. There are different chassis for different gearboxes, so a Type 9 chassis has a narrow tunnel and wide footwells, while an MT75 chassis has a wider tunnel and one wide, one narrow footwell and SEiGHT and Mega S2000/Sport 250 chassis, (though not the same), have even wider tunnels and two narrow footwells. This width variation hits pretty much every piece in the carpet set, too, rear bulkhead included.

Please note a change of date this month from Wednesday 23rd April to THURSDAY 24th April Location is same; The Halfway House Pub, Cullompton. Thanks

Couldn't get a selfie as there were people about. And I did get it quite close.

Hi still got them, if so can I take them. Thanks Martin

Red 3 point harness suited for Westfield cars. No damage only general marks for use over the years. The buckle works well, not stiff or anything. It's been in regular use until a few months back where I swapped it out as I had non-matching harnesses in my car. Collection from Hailsham, or can post for £5

Thanks

Hi, I have one for sale, in very good condition, garaged and used until a few months ago, see spec and pics below: Specification Reg Q558 APN Rover V8 engine fitted 2,500 miles ago, at the same time a heavy duty clutch was fitted and brand new Tremac T5 gearbox RPI 4.6l stage 3 engine Lloyds Brothers electronic distributorless ignition fitted 500 miles ago Bespoke aluminium 5 bar radiator Wheels refurbished and fitted with new Tyoya r888 tyres New carpet set fitted 1000miles ago All accessories available with car – programs, laptop for tuning (base tuning map installed on laptop) New boot box fitted with locks and keys Two covers – dustcover and a waterproof cover Originally bult in 1996, in dry storage ever since MOT expiry 10/6/25 Tax (sorn) Oct 2025 email: t.g.medhurst@sky.com Westfield sale.zip

Just a reminder that this is still on. Should be five or six cars heading down, and hopefully @DefGeoff, @LiamB and you can join us at some point during the time we are in Cornwall? Drop me a note and we can make arrangements to meet.

@Wowblaauw sent you a PM just now.

Hi, I'm also based in Plymouth. Thinking about heading to my first trackday, Castle Combe has spaces available for next week (28/04) so I'm very tempted! Cheers Jaime

Not 100% sure as I never bothered with carpets, but might need to say what width tunnel you have as that varied over the years 👍

Ian.. TY for the kind thoughts.. Sorry I missed your message, I don't log in often enough.. 👍 😁

I've emailed you regarding the roll bar.

wanted a full set of carpets for SEiW - in black or black & yellow trim - either new or in very good condition or if anyone has a supplier that can help. TIA Phil R

/deleted

Thanks for the replies. I'm planning to come and watch next weekend. I always plan to attend more often but never seem to get a chance.

Hi yes - wide body and yes AP Brakes and servo thanks for the pointers

It does indeed MrK.

Thought I'd follow up on this, as I prepared one of the connectors I was alluding to today. 2 jubilee clips each side so the outer ones can clamp the split hose, which is parted at the point of failure. This connector suits 16mm / 5/8" ID hose.

👍