All Activity

I had an imported MR2 years ago and found this - the front wings for example are completely different on JDM cars to UK spec

Tip your seat backwards more. Brings your eyeline upwards.. Also supports your rear thighs better taking weight off your heels

Flux covered my dax no problem

Japanese plates are square. Not long like ours. They have an MOT test certificate from new showing all faults the factory found during production and given to the customer. They also have tighter panel tolerances so if EU cars were hood/fender flush +/- 1mm... It'd be half that on the Japanese car. They ARE hugely fanatical over exterior appearance right down to the floor it's as important as eyeline. This is different here. Although they are right hand drive there are huge differences. Speedo is kph not mph. No rear fogs usually Majority of parts are physically different even tho same model. This is down to the different environmental needs and government laws. So for example steel brake pipes here.. In Japan it'd be different steel and corrosion protection. Trust me they are not the same thing. I worked inspecting jap cars built in the UK sent to Japan for 30yrs....

I've often wondered about Japanese cars, why are they so clean? Are they fanatical about keeping them well or is it just they don't have any rain? 😬

I bought an imported 2013 Audi RS4 Avant last year (it was imported by the previous garage owner) to save money on road tax. But it did make it harder to insure. Not impossible, just harder. Probably compounded by the fact that it is a performance car, which also reduced the number of willing insurers/underwriters. The car itself was immaculate and to quote the guy who modified the exhaust internals (so it sounds a little fruitier), he's never seen such a clean car underneath either. Mine was already on regular UK plates, so I imagine if the space is available, you can do the same to whatever you import.

Anyone here know how it may affect things like insurance if I were to buy a Japanese import car? Any other downsides? I notice that every Japanese import car I've seen has a different number plate font than the standard UK one. Is that just to make identification of an imported car easier?

Purchased from Westfield but never used 78 deg opening temp £15 collection Derby

Chearsley car show , managed to get in with some tasty classics … https://photographyfullstop.pixieset.com/chearsleyclassicandvintagecarshow/

All 15 places filled for tomorrow. Looking forward to another great day!

Have a great day @MJS71 🍺🎂

That's good to know. Thanks.

Hi guys, October's meet for the northeast will be on the Tuesday the 14/10/25. this will be one our last evening runs out due to daylight, before heading back in doors for our meets. usually crack, we are going to meet at the Church Mouse Chester Le Street DH2 3RJ, meeting around 6.30pm and off on a route done by Scott, Westfield_bumble Look forward to seeing guys there.

Please add the two of us Andrew. I'll PM you with preferences soon.

Mk3 wheels won’t fit an SDV. The PCD and number of studs is different on the MK1 and MK2 MX5 which was used by Westfield as the donor.

MK 1 and 2 totally different (struts) and not used on a Westfield.

Are these still for sale? I've tried to PM you with no joy.

Many thanks, hadn’t thought of that! Will check

Ford type 9 gearbox, short input shaft. just had new lay shaft bearings, 5th gear synchro and oil seals. unsure of gear ratios I’m afraid. Magnetic drain plug installed to the housing. collection only Bristol

I might be wrong but, check that they aren't imperial threads. Ford may have gone metric later.

Spiffy, thanks very much.

Sorry for the delay. I can’t see anything in the Admin CP that would trigger auto renewals - turning off save details seems sensible, but it was still enabled in stripe (despite unchecking in the Admin CP) so I have also made that change in the actual Stripe account. Time will tell I guess! As others have said I hope you get well soon @Maurici- CleaR Motorsport

Price reduced

Thanks Ian. Fortunately the thread in the upright is fine. I swapped the bolts over and the other one went in and tightened with no problems. I’ll post up a picture when I’m home on Friday. Mine are Cortina uprights I believe, and the bolt should be an M12 32 as far as I can find. Westfield list them but not sure if it makes sense to source elsewhere.