All Activity

That's really interesting, I had a hunch that's what might have been done. Worrying that part snapped....

I know when I bought my kit in 93 the hubs were exchange items and Westfield machined down the Ford ones o/d to suit the Volvo bearing fitted to the upright. The stub axles were standard Ford items.

Hi, during a recent track day, my passenger side rear hub nut came off leaving the rear wheel with a rather large negative camber and no drive from that side. I was lucky the wheel never came off. Since then I've taken it all apart and found the following: 1. Thread was stripped on the outer drive shaft, which was probably cause of the hub nut coming off. 2. The outer hub (part with the wheel studs on) the spline section had snapped. Leaving what was left of the splined section half left on the outer hub and the other half in the inner upright. So I need to replace the stub shaft, due to the damaged thread and the outer hub due to the splined section snapped. Not sure yet if I need to replace the bearing in the upright, but I might just to be safe. The question I've got is this splined section on the outer hub is quite thin material and I assume its a standard westfield supplied hub. I've never replaced it. It's on an SEIW ZK with Sierra rear diff/driveshafts. How does this splined section compare with a standard ford item? Like the ones that can be bought from Burton's? What size bearing do these take? Both from westfield and standard from ford's? Are they different? Do I have to buy Westfield parts? I assume not as these are standard ford's parts? Any advice welcome. My Essex group have been really helpful in guidance, but thought I'd out this out there for the wider forum to view and comment on. Lastly anyone else seen a similar issue?

Brill, thank you

Yeah, been looking for that all over the place...

AB Performance early CBR1000rr Fireblade airbox As title. These rarely come up for sale now. Was bought second hand for a project but wasnt required. Was off an older Blade but could be adapted for other engines. £100 + postage or collection Lytham St Annes 07947719580

£100. Collection from the Wirral.

Dimensions here

As above i have a Sport 250 radiator for sale. The radiator has only covered 1.5k miles and is in good condition. The mounting brackets for the intercooler are fitted but these could be removed if required. Also fitted are the mounts for the radiator fan. Email jmc607@btinternet.com

As title I have 2 wheels for sale. these are grey and in great condition. They were on the rear of my car fitted with 205/60 R888’s and after fitting my carbon arches the tyres caught the outer edge of the arch over bumpy roads. I’ve bought the same wheels in 8” these wheels have not been available for a long time and so are quite rare I believe, from what Compomotive told me. i will update with some better pics on Friday I’m not really sure what to value them at so will ask £300, but open to negotiation. Located in Carlisle Cumbria, or organise your own collection. thanks. Matt

FoxHunter 1 Ton Tonne Hydraulic Folding Engine Crane with Wheels – Model No SX0103-2 - Red + Timbertech MTBRK04 Engine Load Leveller. Both in very good condition. A must-have for lifting engines, machinery and all heavy components; * Ideal for moving, repair, maintenance and assembly; * Folding design is easy to assemble and store; * Adjustable legs provide greater stability; * Universal wheels provide easy manoeuvring and positioning; Product Specification: * Max Capacity: 1 ton; * Colour: Red; * Model No: SX0103-2; * 4 jib positions to choose (1T,3/4T,1/2T,1/4T); * Lifting Range: 0-1830 mm; * Product size: 1610(L) X 850(W) X 1450(H)MM; - A: 1450MM; - W1: 695MM; - W2: 850MM; - 😧 1610MM; Contact jmc607@btinternet.com Buyer to collect from York area

Here's mine. Sierra SDV 2.0l

Does any one have a set of the door straps, or could provide dimension so I could make some? Currently not available from Westfield.

Thank you @Ian Kinder (Bagpuss) - Joint Peak District AO i need too @Robin Parker (Red Spider) - Yorkshire AO

Hi, Its that time again! We are meeting as usual at the Clock Warehouse at 7pm (DE72 2GL) for the usual bevvy and a catch up. We will park in the right hand, lower car park and be sitting upstairs Hopefully the weather will be friendly enough to bring out the cars too! Look forward to seeing you

I’m planning to be there but not sure it’ll be in the Westy, I’ll also see how Tez is and pick him up if he’s up to a drive out… 👍

It’s the same in the Midlands 🫣

Love that road - we go to Dorset/Devon & Cornwall every year & my missus is sick of hearing me say “I’d love to drive the Westy from Weymouth to Bridport” very jealous in comparison to watching the sun set over the Wrekin in Shropshire with JLR EPMC (electric propulsion manufacturing centre) in the forefront 🥴

Happy birthday Ben, 🎂 You need to get out and join us sometime.

I was under the impression that everybody just pretends to run one ???🤣

you haven’t yet asked about the fitment of a catalytic converter…..

Have a great day @Morley 🎂🍺

Sold. Please delete

Bump*

Bump*