All Activity
- Past hour
-
-
Sharing what you’ve just done. Not questions. No comments required.
dvd8n replied to DamperMan's topic in The Start Line
I don't know if it's just the angle of the photo but it looks like quite a crank on the gear lever. Does the reverse lockout give you problems with that bend? -
Hi Ash how much would you sell engine gearbox and wiring loom for?
- Today
-
Malvern kit car show. We need your help!
Martin Bell - (Bellyboy) East Anglia AO replied to Martin Bell - (Bellyboy) East Anglia AO's topic in Local Area Meets, Events & Kit Car Shows
Hi everyone. Thankyou to all that are helping and have come forwards to volunteer so far. We really need the extra people to assist with one of the busiest stands at the show. If you are coming either Saturday or Sunday and can give us just a couple of hours we would appreciate it. You would recieve a free volunteer t shirt and breakfast if your staying over. We really need your help! Reply on here with the day your coming and we will be in touch. Cheers Martin. -
Flying Carrot Steve started following SEIW 2.0 ecoboost 520 hp/ton monster and Breaking complete car seiw
-
Hi Ash. An acquaintance wants to know if it has a flat bottomed steering wheel? He is after one, MOMO Mod 27 or similar he says.
-
@sebdangerfield the Lakes and Dales tour group are staying in the Kendal town centre Travelodge in June. It has an underground car park
-
-
SEIW 2.0 ecoboost 520 hp/ton monster
Flying Carrot Steve replied to DMc's topic in Westfields for Sale
The spec is amazing! What a fab Westie that is 👌 -
Having tried and miserably failed to keep up with David around the highland roads, I can confirm that it is one seriously quick car! But not only that, it is also of impeccable build quality. Has to be of the best out there.
-
DMc started following SEIW 2.0 ecoboost 520 hp/ton monster
-
308hp & 300lb/ft torque, weighing just 600kg (1/2 tank) Resulting in around 520hp per ton. Ford 2.0 ecoboost engine. (chain driven) hybrid Turbo. (Capable of 380hp) Uprated turbo actuator. GFB adjustable (full re-circ/atmosphere) blow off valve. RadTec radiator and intercooler package. sport 250 rad duct cowling. 3” exhaust. Westfield carbon fibre 6” silencer. Thermo-Met custom exhaust insulation. Ford Mustang inlet manifold. Ford Mustang engine cover. PowerTorque RWD baffled sump. SCS Delta GDI4 stand alone ECU (fully mappable. SCS closed loop lambda control. Ford Duratec 85 degree coolant stat. Setrab oil cooler. Setrab oil cooler fan. (Controlled via AIM dash temp info) Mocal billet remote oil filter with integral 80 deg thermostat. DanST billet oil take-off plate. High flow torques hose fittings with PTFE hose on oil and fuel lines. Millers race oil. Odessey battery. Mazda MX5 mk3.5 5 speed gearbox. Westfield sport 250 Helix clutch with billet pressure plate. Vitesse concentric hydraulic clutch conversion. AP racing clutch master cylinder. 3.62 Ford Escort cosworth LSD. Custom made long range fuel tank (38L) top mounted filler, and anti surge baffle-ball filled. (250+ mile range) External Swirl pot dual pump set up - Walbro 392 HP pump. Walbro 395 lift pump. Focus RS mechanical DI pump. Fuelab billet fuel pressure regulator with gauge. Fuelab Billet HP fuel filter with replaceable filter. Billet pre pump filters for both pumps. APS alu AN fuel hose and fittings. ATL 0-5v fuel sender probe. (No moving parts) Siltech racing front 4 pot lightweight brake package Including custom super light front vented AP discs with aluminium bells. Genuine VAG rear calipers (handbrake retained) Westfield grooved rear discs. Tilton adjustable brake bias bar. Dual AP racing brake master cylinders. Braided 3AN Teflon brake hose throughout with APS stainless steel fittings. Motul RB660 brake fluid. 2.4 quick rack. Siltech Racing super-wide front wishbones. Siltech Racing Micro adjustable (rose jointed) rear wishbones. Siltech racing front and rear adjustable anti-roll bars. Westfield alloy front uprights. Lightweight billet alloy front hubs. Westfield alloy rear uprights. Protec shocks, re-valved and calibrated by Procomp motorsport. Faulkner springs. NMB rose joints used throughout. Force racing billet 3 piece wheels Weighting just 3.8kg! 13 x 8 13 x 10 Avon ZZS tyres. (Nearly new) Caged FIA spec full cage. Longacre rear view mirror. AIM XMS strada digital dash and sensors, linked to SCS ECU via Can-Bus. BlinkStop wireless steering wheel buttons (programmable Indicators/high beam/horn) Fan override (on) switch. Push button start. TRS 3” harnesses. OMP 300mm wheel. Racetech quick release system. Dual USB power socket LED lights all round (inc headlights) Gerbing heating clothing power socket. Lightweight race ZK bodywork in ford stealth grey (gelcoat, not painted) Currently professionally wrapped with Hexis ‘Wasabi green’ metallic. Extra wide rear arches (305mm) Carbon nose cone Carbon NACA duct air intake. Carbon chassis/interior panels. Carbon flared side panels. Carbon front splitter. Carbon headlight pods. Carbon indicator housing. Carbon boot cover. Carbon diffuser. Carbon aero+ wide front wings. Carbon aero screen. Carbon kick strips. Carbon dash. Carbon tunnel top, rear and side interior panels. Carbon chassis & cage trim. Carbon cage protectors. Carbon gear knob. Audi TT gear surround. OBP ‘dark matter’ passenger foot rest. JK composites seats. (Both on runners) Built for the Ultimate Road and Track Experience The goal was simple: create a car that’s perfect for road trips—capable of being driven to the track, enjoyed all day, and then comfortably driven home. By focusing on weight reduction throughout the build, the car retains exceptional handling and delivers a superb driving experience. Countless hours of development and fine-tuning on the dyno have resulted in a car that’s incredibly fast yet remarkably smooth and easy to drive. It cruises effortlessly and responds with precision, a testament to the quality and attention to detail invested in the build—truly second to none. In 2019/20, the car underwent a full, chassis-up ‘nut and bolt’ rebuild. During this process, the chassis was heavily modified and reinforced, especially around the rear end and differential, to handle increased torque. Additional strengthening was applied to the front suspension area. Lowered steel floors were installed, and the entire chassis was shot-blasted and powder-coated in satin black—effectively making the car like new. The track width is approximately 160mm wider than a standard SEIW, contributing to its enhanced stability and performance. The cars had covered 14,500 miles since. Registered on a Q plate, the car is exempt from emissions testing at MOT, meaning a catalytic converter is not required. This also provides greater flexibility for tuning the fuel and ignition system to achieve optimal performance. The car comes in 2 colours! The fibreglass is ford stealth grey (see pics) which is currently professionally wrapped in stunning Hexis ‘Wasabi green’ £27k I’m Happy to listen to feedback on the price, I just haven’t found anything to compare it to so it’s been difficult to value. But it’s quicker than a 620r and half the price
-
Sharing what you’ve just done. Not questions. No comments required.
Flying Carrot Steve replied to DamperMan's topic in The Start Line
Same as me then. I thought mine was further back but just looked and I guess it's about the same. What differences have you noticed with the new stick? -
Malvern kit car show. We need your help!
Ian Kinder (Bagpuss) - Joint Peak District AO replied to Martin Bell - (Bellyboy) East Anglia AO's topic in Local Area Meets, Events & Kit Car Shows
@Trevor Little (Trevturtle) - Treasurer please find a roll for John and let him know what he'll be doing. @jmathews thanks for stepping forward. -
Sean92 joined the community
-
Warwickshire Area Track Day at Curborough Sprint Course Friday May 16th
heawooi replied to Martyn Vann - Warwickshire AO's topic in Track Days
-
Everything is for sale This car is road registered on a q plate Duratec 2.0 engine Seiw The car is a 1995 which had a rebuild in 2013 new chassis bodywork from westfield Damaged on the front passagers corner Unrecorded damage The car will be 30 years old in jun this year so if anybody in france or any other country is interested i will sell you the whole car or bare chassis with the v5c as over 30years old makes it easier to register Drop me a pm if you interested
-
Dan Butler joined the community
-
Sharing what you’ve just done. Not questions. No comments required.
joolz replied to DamperMan's topic in The Start Line
It's a type 9 on the back of a zetec. -
Standard width I also have a green pair aswell in nice condition
-
Sharing what you’ve just done. Not questions. No comments required.
Flying Carrot Steve replied to DamperMan's topic in The Start Line
I'm laughing so hard here, you seem to spot things mere mortals can't! -
Sharing what you’ve just done. Not questions. No comments required.
Craigieboy replied to DamperMan's topic in The Start Line
Your less Dick Mayo and more Dick Emery! -
Sharing what you’ve just done. Not questions. No comments required.
Flying Carrot Steve replied to DamperMan's topic in The Start Line
What gearbox is it? May be the angle but it looks further forward than mine. My gearstick isn't particularly long but works well enough despite that. -
What size are they
-
Sharing what you’ve just done. Not questions. No comments required.
joolz replied to DamperMan's topic in The Start Line
-
SeftonH joined the community
-
Daft questions before my first roadtrip
Kit Car Electronics and Essex AO replied to sebdangerfield's topic in The Start Line
Pricey, but I really recommend ram mounts ball mounted phone holders - rock solid once mounted -
Yeah, they're nearly a thousand cheaper than that direct from Cobra at the moment. That's a lot to pay for Westfield embroidery.
-
Towel 😁
-
Happy Birthday Mark
Mark Stanton replied to Ian Kinder (Bagpuss) - Joint Peak District AO's topic in Stuff & Nonsense
Thank you, Captain and Mr Carrot 👍 Apologies for the lateness, however, my log ins to the land of all that is WSCC are less frequent.