All Activity

First run out of the year for most of us. Nice and sunny , we were in the shade but in prime position right outside the restaurant. Think we managed 10 cars, forgot to count, with @DannyTGS and @Jakejmagee making the trip. There will probably be another Kit Car and Modified day later in the year. Thanks to all who came.

SUPERCHARGED FORD DURATEC 2.0 Ltr ENGINE - 330 BHP. Mapped at N'ton Motor Sport (Video available.). 700miles (None Competative). High Quality Internals - Supertech Pistons, Newman Cams, Cosworth Steel Crank, Rotrex C30-94 Supercharger, 750cc Injectors, Jenvey throttle bodies with throttle blip for pneumatic gear change, Custom 4-2-1 Exhaust 50mm headers. Titan Dry Sump, Titan Oil Pump, SBD Dry Sump Tank. All Newly made Braided oil lines with matt black couplings. Small Lightweight Denso Alternator. TTV 1 Piece Custom Crack pulley, keyed to suit crank. Custom PCCB Delete plate. JEVENY Throttle Bodies. Bespoke Polycarbonate Plenum. Bespoke Aluminium Intercooler. Upgraded Golf Radiator.Lightweight Plumbing with Co-ordinating Blue silicon hoses, Davies Craig Electric Water Pump and controller. DTA S100 ECU Controlling Engine and G60 Sequential Gearbox. 20 Litre Foam filled Fuel Tank with internal primary pump & fuel swirl Pot. High and Low Pressure Fuel Pumps. 7” Superclutch. SBD Lightened Flywheel. Brand New Magnecor leads and plugs. Always run on Millers Nano Grade Motorsport Oil The car is only running 0.7 bar of boost, there is a lot more power to unleash with minimal effort/expense. Similar spec engine from Burton PowerEngine Cost (excluding rotax supercharger) 250 BHP £21,114.00 in addition the Rotrex supercharger kit & ancillaries £7500 - TOTAL COST £28,114 https://www.burtonpower.com/omex-260-bhp-engine-rwd-dry-sump-d20na051d.html & https://view.publitas.com/burtonpower/2025-catalogue-pages/page/15. Lead Time 12 weeks Quaife G60 gearbox. Quaife website showing a new box £6,929 https://shop.quaife.co.uk/shop/gearboxes/sequential/qbe60g/- https://shop.quaife.co.uk/wp-content/uploads/2014/06/QBE60G-GA.pdf Paddle change fully integrated flat shift change.Fully closed loop pneumatic gear change – no clutch required for up/down shifts. System runs a compressor with accumulator. Price £20,500 – Engine (inc ancillaries Exhaust, dry sump tank & lines etc) & G60 Gbox. Prepared to sell engine £15,500. Cost of building a Duratec to the same specifcation approx. £30,000. Price of Gearbox £4,500. Any queries contact me. tel 07952513623

No more, just nova,quaife and westfield now quaife being the best as no chain inside like nova and westfield

Joyrider and MNR i think, at least used to be...

At this moment in time we are free on that date, but things change quickly in our household

honeycomb_mesh.stl Here is the free mesh I found and used.

I didnt realise it was tricky, glad i have a reverse box then! I think theres only really 3 reverse boxes though? The westfidld one, the nova one and the quaife? Do we know of any other ways of getting reverse on the bike powered cars? Apart from pushing!

The first Curborough breakfast club meeting is on tomorrow morning. The Austin 7 owners are on track, too! The weather is looking good, so see you there.

Rear main seal now replaced. Clutch arrived today too! Be a shame to hide this away.

First run of the year and loving it!!

Difficult to fit an electric reverse to a westfield tunnels very narrow compared to mk no where to mount motor i think a couple of westie owners have done it at the front end but not easy.took mine to mk sportscars and they told me to forget it not happening.

Fidget actually sat still for a photo LOL

I dont know if it is a direct fit, but its an ootiin for a reverse box, i know of them because i have one in mine, it was fitted when i bought it and its been ok so far, needs a gentle hand to go from first to reverse but works ok, i cant complain but i think for the amount of reversing i do i will probably use a starter motor type next time though

Hi Paul, I got mine from below a few years ago based in Wolves NAPA AUTO PARTS - WOLVERHAMPTON 38 Dixon Street WOLVERHAMPTON WV2 2BP Telephone: 01902 455434

Google TVR Glen thoroughly before even thinking about buying anything from that operation. We’ve seen a surprising number of Westfields that were written off belonging to owners on here go through his doors. The damage description has NEVER once fully matched what the previous owner described. Nor does it usually match the photos the owners have put on the forum.

What a great idea cropping another model. I'll have to try that.

Thank you. Fits directly? Any reviews?

Still a work in progress on mine but if you check the downloads section there are 3D models already available. https://forum.wscc.co.uk/forum/files/category/112-the-mofast-files-an-archive/ I wanted mine to fit from above rather than underneath like the existing available models. For honey comb I used a free model online and just trimmed it down to fit the vent.

Could try in the 3D printing section. Good little project for someone. I'm new to it so don't have the skill to draw honey comb yet.

Located in Hailsham - 07869473434 Hoping for around £600 MK1 Ford Focus for sale. 1.6 Zetec engine, new spark plugs, oil, filters. It was kept as a spare car however I don't have space now. It needs a front spring and wheel bearing to pass an MOT. Chassis is solid, been advised it's a solid car with no body or chassis issues. The interior is good for its age, no major damage. I've given it a clean since the photos so it's a little fresher. The exterior has an odd coloured wing mirror cap, a small mark on the bumper and the corner is popped out, and the tailgate has a small rust patch where water has sat on the window lip. Otherwise it's good and as expected for a car of its age with only general paint marks. I need to clear some space. Recently had a new grill, front fog and rear fog light fitted. I can get more pictures soon! Collection from Hailsham area. If you're at all interested please drop me a message, I'm always happy to help and need the driveway back!

When I purchased my Westfield I thought it was going to be living outside so I purchased this Stormforce Outdoor car cover, but then I found it fitted in my garage. This is brand new and has never been out of the case. It has been stored inside in the plastic bag. These retail at £200. The part number is CCC578. I’ll sell this for a bargain of £130 collected or £135 posted.

Hi Chris I would like them I will pm you Thanks Jem

Brand new and never fitted. Billet water pump pulley RRP £66. yours for £40 which includes postage no fees. Sold Ive personally fitted one of these but had a spare. I’ve included a photo of a silver one fitted to my blacktop. Below is the item details. Zetec Engine Alloy Water Pump Pulley - Billet Aluminium Anodized Black Finish For use with the Ford Zetec engine Pulley diameter increased by approx 20% for reduced pump RPM CNC machined billet 6082 T6 grade Aluminium - less rotating mass and more balanced compared to standard steel pulley Anodized black finish Excessive RPM can cause fluid cavitation at the pump impeller, this can cause a number of issues: Decreased flow Excessive vibration – leading to premature seal/bearing failure Damage to the pump impeller blades Damage to pump housing

If you dont find anything westfield, nova racing do a box that is is similar

Hi. Does anyone have some Gates Barricade fuel hose leftover or to sell? I really need to replace my fuel lines. I think I require 27348 type for the westfield. Thanks.