All Activity

Hi - are these still available by any chance?

BRG, not Westfield Racing Green.

Assorted. Open to offers, collect from the Wirral.

yes please! HB @Marcus Barlow - Show and Events Co-ordinator

Mocal 19 row 115mm -12 JIC oil cooler which has had very little use £75 Alloy 0.5L Oil Catch Tank with vented cap 3/8" BSP ports, 1 off elbow to suit 3/8" hose, 1 off elbow to suit 1/2" hose £35 Collected or plus post

Bolt in roll cage mounts £25 Base mount seat mounts to suit Tillett B6 seats £30 Collection or can post for extra

Our “maybe” is now a definitely 👍 edit to add no lunch for us, on a diet 😮😂

13x8j Wellers with 200/540/13 slicks, full set of 4 wheels. Tyres have plenty of meat left with the wear markers still clearly visible. Wheels are in good condition bar a couple of marks from clumsy tyre fitting on one wheel. These are dual PCD and will fit ford 4x108mm (ie Westfield!) as well as VW and lots of Jap cars with 4x100mm. Offset is ET15, and these were fitted to a SEiW as my track day wheels until I recently sold the car. Please note the spare pair of tyres visible in one of the photos has now been fitted to the wheels to replace the two tyres that were worn out. Collection ONLY from West Horsley KT24 6HS.

I'll take the splitter if you're ok to pack it for shipment. I can take care of the shipment with collection at your address eventually.

Check your handy list of expletives and learn when and where to use them, and at appropriate volume levels. Stock up on beer as it’s an essential lubricant during maintenance. Just because your missus says it’s okay to store spares and rebuild your carbs in the dining room doesn’t mean she’s happy about it.

Stainless braided rubber fuel hose, AN-6 fittings £15 Stainless PTFE lined AN-6 approx length 135cm & 90cm £10 Grp clutch cover from Sport 250 £15 Clutch pedal from Sport 250 £10 Stainless braided brake lines approx 48cm long 1/8npt one end 3/8 unf AN-3 the other £25 Collection or can post at extra

Thanks for sorting the directions out Dave 👍 I have booked us all in for lunch, so no more entries please as there will be nowhere for you to eat. Thank you for understanding on a busy Easter Sunday (I had to negotiate a table booking without a £10 a head deposit, trade concessions as my sales manager used to teach me 😉)

Yes still available Ill pm you

OK .. shall I bring to Malvern?

steering wheel please @Marcus Barlow - Show and Events Co-ordinator

thank you my friend

Yes, we try to hold an annual weigh-in/ BBQ for the Essex & N Kent area - the cars tend to get lighter as the owners get heavier 🙂

Hi, I will take the diffuser if still available, thanks, Richard

Hi bit of a long shot but is this still available?

Hi and welcome. Sounds like you have found yourself a similar car to mine. Mine had been sat for around 14 years so it's taken quite a bit to get it back to a useable state. As others have suggested anything rubber might have deteriorated and anything exposed to fuel will have suffered. It sounds like the previous owners have already done quite a bit so it might not be that bad. I had some issues with the brake master cylinder and rear wheel cylinders (if you have drums on the back) and had to replace everything. Another unexpected problem was the fuel tank. Mine was foam filled and the foam had started to break down. The fix for now was to pull it all out. There is lots to read up on here, my resurrection thread covers a lot of what I have done and others have written similar. If you don't have manuals you can download some from the club and at least a haynes manual to cover the engine and mechanicals will help.

Good point. Mine had 28 in when I bought it. I now run 18 front 16 rear.

FW rear diffuser (new) £250 Zetec tunnel sides approx height dimensions are 340, 240, and 300mm, has been in storage and wrapped in cling film so will need a polish £150 Tunnel top approx dimensions 190 height 525 to bend and 300 to end, has been in storage and wrapped in cling film so will need a polish £50 Clutch foot rest £50 All collection or post extra or can take to Blyton next month

Don’t use the post code - it takes you to the wrong place, here’s Quackers instructions: Access by car is via the A6020, Hassop to Ashford Road just off the A6. Follow our Parkland Drive to our brand new car park. There is a drop off zone outside the café and 5 disabled parking bays next to the café. Use what3words///gather.mango.tank to find us (our postcode doesn’t take you to the correct location). Here’s the turning on the map. When you turn left off the A6020, through the gates, follow the estate road round, then take the right hand fork and head up, past the ponds, the car park is at the end of this road.

Or any tank compatible 😊

One tyre related note; if you’re not used to cars as comparatively light weight as Westfields, it’s easy to get caught out on the tyre pressures. Typically, most owners end up running somewhere around 18psi, sometimes a little more, sometimes a little less - they’re quite sensitive to it, especially on track. 18 is a good starting point while getting used to the car though. Using the quick fit tyre fitters default of around 32 psi will feel horrible, like you’re on ice, and may even have you sliding around