All Activity

@Nick Algar - Competition Secretary very similar spec to mine. Do you know your gearbox ratios & how do you find the 4.44 diff on the road?

that's ridiculously good value, what a rocketship that must be !

Seems a good deal to me. What year is it?

Hopefully they have a nice long tail on them buried deep into the asphalt! I'm amazed that cats eyes are still being used tbh, I'd have expected something new to have been invented by now, testament to the fact that they were a revolutionary invention I guess.

Thanks Dave, I'll take some pics later today and post them.

Wonder how far/high a truck can fling a loose one of those.....?

@DIY-Si see my recent parts wanted ad... can you price up steering wheel and number plate/lights device ( inc postage) and let me know....

Happy to consider any combination of parts offers ie basic engine less carb and inlet manifold in case you want to install fuel injection. Let me know what you need.

I wouldn't worry; in a few months they'll start dropping off.

That’s a LOT of car for the money! GLWTS

Quickest way is to put a photo up. if they were originally supplied by Westfield, they have the Westfield Sunburst logo cast into them, normally. However, if supplied direct via Hi Spec, or from another Hi Spec dealer, they are plain. (They may also have a slightly different steering arm).

I know 7 owners have had issue with proving seat strength in the past, but I'm not aware of any XI owners having the same problem. Make of that what you will! I've still got my IVA steering wheel with matching boss and centre pad. My rear number plate holder and lamps are still in the garage, although I snipped the fog and reversing lamps wires short after IVA when I fitted the new undermount lights, so they would need connectors adding. I don't think I have the body mounts any more, but they were simple aluminium strips bent yo suit the car. I'm not convinced my strips would fit anyone else's car..... I'm afraid I've no idea what i did woth my wing mirrors!

In the last few days the roads around my village have been shut for cat eye replacement they may as well have fitted paving blocks the new cat eyes are solid alloy and are 30 mm tall i drove over a couple in the westie and the jolt almost pulled the wheel out of my hands and hit them with the rear wheel and your out of the seat there ridiculous I can't imagine how cyclists and motorcycles are going to manage there's going to be an accident for sure.

Excuse my lack of knowledge but how do I tell if I have Westfield/HiSpec ali uprights? I know I have HiSpec front calipers of that's of any relevance? Are these brackets new or used?

The 7s have belt guides too.... do the seats need to have some kind of certificate of conformity regarding capability to take the load in event of accident or is it just they just have to be high backed?

Have a great day @SlimGym 🍺🎂

Do you know how much these brackets weigh? dave

Stunning looking car Nick, and a great price. I’m sure this won’t hang around for long. GLWTS

I’ve owned this car since June 21, but am just not using it enough, hence the sale of a great car with lots of good history which can be used on road or track. During my time I’ve fitted new Avon ZZS tyres all around and Tillet B6 driver’s seat on sliders together with Tillet passenger seat ( fixed).. 2 litre zetec. Dyno’d at 250bhp. Balance crank to flywheel with oversize 86mm forged pistons and rods. Ported Head, buckets valves. Titan Dry Sump pump and Sbd oil tank, Piper pulleys and Specific Cams All professionally built by Ric Wood motorsport, see enclosed write up in Classic Ford magazine Raceline water rail N/a power on jenvey tbs with Dunnel 4-2-1 exhaust and Dunnell Techcraft silencer 99db Helix super light flywheel with paddle clutch a plate clutch cover Corner weighted and setup with Avon ZZS ( hardly worn) tyres on CXR rims 7 and 9 inch Carbon front wings, Engine floor, side panels, dash, boot cover, front slpitter and rear diffuser fuse and pedal panel. Aero Screen Quick Rack Steering rack Setrab oil cooler JIC Radtec ally rad Half Doors Quaife 26z 5 speed all alloy sequential gearbox Raceline alloy bell housing with geartronics indicator. Seirra gripper LSD Diff on 4.44 ratio CWP, built by Barra Motorsport Has wide rear arches which are quick release Caged Cage DTA ECU and professional loom. Recent sold engine mounts with spare rubber mounts (used) Lightweight race alternator (denso type) Powerlite Hi Torque inline solenoid starter motor JIC fittings and braided hoses throughout, inc front to rear fuel lines in JIC with JIC inline fuel filter on carbon plinth, Standard fuel tank. Drivers seat : Tillet B6 40cm GRP seat on Tillet slider, Tillet B6 40cm Passenger seat fixed. Racetech steering wheel and quick release connection ETB digi dash FIA killswitch Willwood 4 pot front calipers with Hawk DC30 pads Front and rear anti roll bar. Picture don't show diffuser, I'd removed it for MOT. I'm near Newcastle on Tyne, can transport to buyer at cost. VERY high spec Zetec Please PM for more info or email me 7speed@mail.com Price £12,900 or sensible offer. Blyton Run https://www.youtube.com/watch?v=hIzn_yD8dS8Blyton Park Sprint run 2021

That's a shame that they don't. They'll be ok provided they are narrow enough, although the S Turbo seats also have belt guides that may or may not be relevant.

I have, they don't any more.... Will have to track a set down at some point unless the Cobra 7s in my SEiW would be ok...

No worries. We have a plan to get back lol

Sorry, I've already passed my IVA parts onto another owner a few months back. It's worth asking the factory if they now loan out Sport Turbo seats for the test.

At that time you should be ok but as the king has some gigs on at Sandringham over the weekend the traffic is mad..yep worse than normal for silly season.. Mariah Carey tonight.. 😀

That sounds suspiciously like a long list of get-out clauses to me