All Activity

That would be a shame @Morris but either way, best of luck to the lad.

Fw stoneguards For early style fw bodywork that was produced 2006 ish (rear arch is part of the side panel) These have never been fitted I havent seen a pair of these for sale for well over 10 years (rare) Id class them as seconds but after some chip bashing who would know ? These were made by carbon mods in very small numbers £250 plus pat

Happy days Paul, NAPA also sell by the mtr or did back in 2024

I don't think I'll be able to take part this year, as it falls right in the middle of my boy's GCSE exams.

Yes, this. I learnt this the hard way with a Triumph Herald convertible I had as a 'youngster', I would stick a plastic cover over it when not in use, then one hot day I'd discovered it had stuck itself to the paintwork and left permanent marks where it had stuck, from then on I always used a cotton dust sheet between the car and the plastic cover.

Just let the exhaust cool enough before throwing a cover on i hook mine over the head light and wing mirror to hold it out of the way if in a hurry when raining still covers the important parts

Yeah that is a good call really.. might go down this route then to save a bit of cash.

my bad forgot to put one on

price is £4000

No doubt, but you’ve not provided a price in the ad!

Thats true so I always put a cotton type cover over first to protect it and remove the cover every 2-3 days to ventilate even through the summer to stop any condensation building up even if only for an hour or so.

Yeah the hood covers are around £500 or more depending on the size. Have always been a bit weary about standard car covers especially if it gets hot as they can sometimes damage paint work.

If anyone happens to have one spare in good condition please let me know

Aren't those pram hood style covers expensive i keep my car in a carcoon over winter perfect but as said pain to unzip during summer so ive tried numerous car covers from £20 to £100 and all leaked within a short space of time with continuous use as did tarpaulin from screwfix so I went on Amazon and purchased a cheap pond liner for 30 quid and it looks much like a black tarpaulin but it doesn't leak done the whole of last summer right up to December and the car is now out of carcoon and under it again still ok best 30 quid spent in a long time I just put paving bricks round the bottom more if windy does the job perfectly

Please read the full listing !! FOR SALE SPARES OR REPAIRS ...... Westfield Sew 1997 The car is registered as a Westfield on the logbook This is a sew which means its a Widebody car running a live axle The car is running a 1700 Crossflow engine with a 5 speed type 9 gearbox 4 point belts mot until 2/10/2026 I have the v5c here It needs some tlc here and there There has been a small amount of damage that has been repaired on the drivers rear wing which if you want it mint will need some work Please view the pictures the car is hpi clear I checked this before i collected it This has to be the cheapest widebody on the market for sale . No offers I've priced it to sell . The car is for sale as Spares or Repairs !!!!!!! The car runs and drives I've collected the car drove it on to my trailer unloaded it taken the pictures that why its for sale as Spares or Repairs/ sold as seen The car is not taxed or insured so I cannot take you out for a test drive. if you are interested in the car turnup view the car take as long as you like looking at the car if you want to purchase it load it onto your trailer or truck and take it away. serious buyers contact me on 07523249617

Genuine Ford Blacktop Zetec / ST170 oil pump inc Billet gears. Removed from my car earlier this year. Billet gears (allow rpm to be raised, I ran to 7900rpm, others run these to 8500+rpm) supplied by Burton Power and fitted by Paul Exon in April ‘25 and have covered circa 500-600miles. £150.00 inc postage. Photos to follow.

The bubble I am using is great keeps everything nice and dry during the winter months, but yeah a bit of pain to turn off unzip right around the car then getting back in need to alight it up right so you can zip it all back up.. was looking for something a bit quick for the summer so did not have to worry about it.. but yeah that one you linked looks decent as well .

Raceline Zetec wet sump inc Blacktop/ST170 Windage tray. Starter motor on the exhaust side. Lower Raceline windage tray bolts all replaced by Paul Exon as part of engine rebuild in April 2025. Sump & finger plugs inc crush washers along with pickup top hat washers replaced at the end of 2025. Finger plug is drilled and tapped for an M12 x 1.5 sensor thread. £450.00 inc postage Photos to follow.

Spare QR boss and 5/8" weld-on shaft - this is the round boss with 6x70mm and 6x74mm PCD for steering wheels bolt holes - I used the boss for about 3 months before switching to a 3x50.8mm PCD steering wheel so there are fitting marks on the black boss but otherwise perfect and the shaft has never been used. Width: 85mm Depth: 90mm Weight: 0.34kg Shaft Diameter: BGR703: 5/8" New retail is £150, looking for £100 inc shipping or £95 collected (just south of Coventry or at a sprint etc by arrangement). Thanks Stuart .

I might get an indoor bubble for inside the tent for next winter when driving is at its minimum, but the drive in drive out facility of the tent as is is bliss. This comment is coming from previously just having a cover which couldn't easily be put on if the exhaust was hot.

I have one of these. It's just about big enough and is the biggest could fit in to my situation but a bit damp/condensaty in the winter. I could run a dehumidifier in the winter but the back 1/4 is on unsealed ground so I don't think it'd be much help. Or maybe just quite inefficient. https://www.houseoftents.co.uk/portable-garage/67835.html Very sturdy though, totally unaffected by the high winds these last two years, and there's enough room to work around the car as well, including lifting th engine out with a crane.

Im sorted now thanks. I found somewhere online that sells it by the metre. I didnt need a whole roll