Catch Can Tme
Entry posted by toys4x4boys
1,549 views
Was pretty much finished messing for the day, and thought I'd just take a look at my heavy breathing catch can issue.
I'd been collecting bit to have a go at it.
This is what I removed
The large tank ? was bolted to the motor mount, well with 1 bolt anyway, the other lost !
The smaller tank was bolted to the inlet manifold in a heath robinson kind of fashion
And a lot of home made plumbing was evident.
Anyway I just ripped it all out.
I fitted a Burtons blank in place of the home made one, in fairness the home made one had a baffle on it, so this probably wasn't needed, but as I'd removed the old one to check, thought I might as well whilst I had it.
Alloy rocker has 2 unions fitted now.
Block breathes into rocker, rocker breathes into catch tank
Just need to mount the catch tank and vent tomorrow.
Then try it out.
Quick trip to Toolstation turned up a suitable bracket, I wanted the emptying plug easily accessible.
3 Comments
Recommended Comments