Geoff101 Posted July 22, 2017 Share Posted July 22, 2017 Complete set of rear wishbones from an SEiW. These are used but have been blasted and re-powder coated. They have all new metelastic bushes fitted. No rose joints included. They appear to be straight and sound. I am aware that there are a few different versions out there so the uppers measure approx 330mm from the centre of the bush to the tip (along the tube); the lowers measure approx 455mm between bush centres along the single tube. Cosmetically the uppers are excellent. The lowers are obviously also fully re-coated but there is some pitting where surface corrosion existed on the most exposed bits before they were blasted. In a feat of awesome marketing, I only took close ups of the bad bits. These don't seem to come up very often so I'll test the water at £225 collected from just outside Bicester or plus postage if you need them shipped. Link to comment Share on other sites More sharing options...
Geoff101 Posted July 25, 2017 Author Share Posted July 25, 2017 Bump Link to comment Share on other sites More sharing options...
SouthhamsChris Posted November 30, 2017 Share Posted November 30, 2017 Hi Geoff Have you still got your rear wishbones? Link to comment Share on other sites More sharing options...
Geoff101 Posted November 30, 2017 Author Share Posted November 30, 2017 Long gone I'm afraid, but Laptoprob71 who bought them only wanted one so had the others spare. I don't know if he ever sold them but it might be worth asking. Geoff Link to comment Share on other sites More sharing options...
Recommended Posts