Paul Aspden Posted April 14, 2017 Share Posted April 14, 2017 1988 Ali bodied pre-lit Westfield rolling chassis comes with the following: Rear axle, with extended trailing arms, and Mumford link (requires finishing) Open diff, drum brakes, vandalised fuel tank! Swept wings and nose in red grp, rear wings in grey primer Chassis has been modified for long trailing arms, and has had a number of the lower tubes replaced prior to powder coating in grey. The chassis is in good order and has a fixed hoop and diagonal, with rear stays Windscreen, sidescreens and hood are all included Front standard track wishbones with cortina uprights (needs correct hubs) Escort rack. Floor mounted pedals and cylinders Rolling on 4 spoke revolutions wheels powder coated white The Ali panelling has been very poorly fitted and requires replacing, which will instantly transform the car into a desirable classic Westfield. Engine mounts are on the chassis for a x flow. The chassis is correctly registered and comes with a V5 on a Q plate. Priced to sell at £2375 ovno. Call Paul on 07973 504785, to arrange viewing (in Harrogate) 1 Link to comment Share on other sites More sharing options...
tkm_dave Posted April 14, 2017 Share Posted April 14, 2017 Rare b******* this with the alloy body! Link to comment Share on other sites More sharing options...
alexander72 Posted April 30, 2017 Share Posted April 30, 2017 engine mounts for a cross flow - what more does anyone need to hear?? 1 Link to comment Share on other sites More sharing options...
garytipping Posted May 5, 2017 Share Posted May 5, 2017 If I wasn't already building one!! Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted May 5, 2017 Share Posted May 5, 2017 Just imagine it with a tuned 1700 Puma, Elite gearbox, Force racing rims with slicks and carbon nose and wings front and rear Link to comment Share on other sites More sharing options...
tkm_dave Posted May 5, 2017 Share Posted May 5, 2017 or a bike engine Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted May 5, 2017 Share Posted May 5, 2017 10 minutes ago, tkm_dave said: or a bike engine wash your mouth out! Link to comment Share on other sites More sharing options...
CL290005 Posted May 5, 2017 Share Posted May 5, 2017 8 hours ago, garytipping said: If I wasn't already building one!! And, you can always have two, I'm sure second one would be easier especially as no need for IVA 1 Link to comment Share on other sites More sharing options...
mark.anson Posted May 7, 2017 Share Posted May 7, 2017 On 5 May 2017 at 15:43, tkm_dave said: or a bike engine Ignore Loudone Dave, it's ideal for BEC project. Link to comment Share on other sites More sharing options...
Geoffrey Carter (Buttercup) Posted May 7, 2017 Share Posted May 7, 2017 It looks to be a bit of fun to get in and out of the garage. Link to comment Share on other sites More sharing options...
Andy Banks Posted May 8, 2017 Share Posted May 8, 2017 Yep, some turning circle required there... Link to comment Share on other sites More sharing options...
Paul Aspden Posted May 11, 2017 Author Share Posted May 11, 2017 On 2017-5-7 at 22:20, mark.anson said: Ignore Loudone Dave, it's ideal for BEC project. Really? Not in my ownership! So it's a good job it's sold. Link to comment Share on other sites More sharing options...
Recommended Posts