Jump to content

Carbon Half Doors Fitted - Sweet!


Kingster

Recommended Posts

Managed to get my nice new Carbon-NV Half Doors fitted today - just in time for the Alps trip on Friday.

 

Thought I'd post up some pics and share my fitting technique.

 

So, my priority here was to avoid making any more holes in the tub or scuttle. This meant that I had to have a cunning plan that involved using the existing screw fixing that holds on my aeroscreen.

 

I figured that if I did this, then I could do a Lamborghini Stylee flip up door hinge - and then just had to figure out a way to hold the doors on without drilling the tub. I also wanted it to be as easy as possible to flip forward and thus make entry/exit easier.

 

So, here's what I came up with:

 

After affixing the front of the door to the pre drilled aeroscreen fixing point - attach a small bungee with some P Clips...

 

FB6F0D34-7B95-476C-8969-A0D7D7521D70.jpeg

 

This is held in place with a small domed head allen bolt in the alloy panel using a rubber 'rivnut'

 

EB4B77E2-9F33-44BF-9E11-4C3490DD8AA4.jpeg

 

The door then gets held in place - with only a couple of rivets visible (I'll paint them black and you'll hardly notice) and more importantly no extra holes in the bodywork - result :)

 

D25F1F54-7BBF-429F-8BFF-DFB897A0D438.jpeg

 

and can swing up out of the way in a few seconds

 

1B1FBCA6-C355-4CD2-9CF2-F877CDA8F5B7.jpeg

 

I also have another small bungee held in place by the JK rear seat fixings - this can loop over the pointy bit of the door at the rear (forgot to take a pic though!)

 

I'll probably replace the bungees with some shock chord so there's no sharp edges to catch on clothing, but it works well for now!

  • Like 9
Link to comment
Share on other sites

It's the future, Chris :)

Link to comment
Share on other sites

Alps trip on Friday.

 

 

 

Alps!! wow ! we need loads of pictures and videos please  :)

Link to comment
Share on other sites

Alps!! wow ! we need loads of pictures and videos please  :)

 

oh yes, well with 5x Westies, a Dax Rush and three motorbikes, I reckon there's be one or two pics!

  • Like 5
Link to comment
Share on other sites

Haha indeed you may! Yes top notch work from Mark very pleased with them.

Link to comment
Share on other sites

Nice job Chris

I have a set squirrelled away in the garage that I have been pondering on how to fit.

Can we have a photo of the rear bungee fitting please

Link to comment
Share on other sites

I'll try and get a pic tomorrow Gary. But basically it's a small bungee bolted with a repair washer to the rear top fixing on my JK seat and then it just loops over the back 'point' of the door.

Link to comment
Share on other sites

Great idea Chris, simple but very effective. I was wondering how you controlled the top rear corner though, till you mentioned the second bungee!

Link to comment
Share on other sites

great idea chris. what fixing did you use to hinge the front

M5 with nyloc and nylon washers.
Link to comment
Share on other sites

Great idea Chris, simple but very effective. I was wondering how you controlled the top rear corner though, till you mentioned the second bungee!

The driver side one actually clips in behind the seat. Not sure how that would work so undecided.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.