Crabbo Posted October 18, 2007 Share Posted October 18, 2007 I wish to check the ignition timing on my Vulcan engineering 1700 X flow, with 345 profile cam. Any one know what this should be, it currently shows 21 deg BTC at 800 RPM. Pete Quote Link to comment Share on other sites More sharing options...
Martin Keene Posted October 18, 2007 Share Posted October 18, 2007 Waaaaaaaaaay too much. I don't what it should be exactly, but 15 degrees wouldn't be a bad starter for 10. Try giving Vulcan a ring and they should be able to tell you exactly. Quote Link to comment Share on other sites More sharing options...
stu999 Posted October 18, 2007 Share Posted October 18, 2007 Is it still running a vacuum advance? Quote Link to comment Share on other sites More sharing options...
Hammy Posted October 19, 2007 Share Posted October 19, 2007 wot they all said. Mine was about 10deg at 800 when i had a dizzy installed. Total advance is probably more important 34deg at 3500, no vac advance fitted. 1700, A2 cam, 2*40's Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.