Paul Aspden (MoFast) Posted September 22, 2021 Share Posted September 22, 2021 So it’s been a busy few weeks at MoFast HQ AKA The Kitchen Table. The latest iteration of the digital dash bezels are now fully production ready so if you want a really clean look by embedding your AIM or RT dash into the dashboard we pretty much have it covered so check out the bezels section of our website We have also been working on a set of bonnet vent grilles for the popular V8 style bonnet. These can be pre ordered here and will be in production in about a weeks time. 2 Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 We have also been working on a set of nose cone air scoops to help with intercooler air flow on the mega S2000s. We are nearly their with the final designs. 1 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 22, 2021 Share Posted September 22, 2021 Whats the cross sectional height/width, vertically, of the openings, out of interest? Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 5 minutes ago, Dave Eastwood (Gadgetman) - Club Secretary said: Whats the cross sectional height/width, vertically, of the openings, out of interest? 1 Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 We also have some roll bar mounts that are a bit more forgiving on the development bench. 2 Quote Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted September 22, 2021 Share Posted September 22, 2021 These look very smart @Paul Aspden The 2nd Will they have a flange on the underside to aid adhesion to the fibreglass? Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 @Ian Kinder (Bagpuss) - Joint Peak District AO absolutely. 2 Quote Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted September 22, 2021 Share Posted September 22, 2021 Hi Paul. Just wondering if these might be available in a different mesh pattern in the future? Like to match the audi style hexagonal pattern that a lot use now Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 @Steve (sdh2903) yes I am going to do that as my own grille is made with the Audi pattern stuff. 1 1 Quote Link to comment Share on other sites More sharing options...
Paul Aspden (MoFast) Posted September 22, 2021 Author Share Posted September 22, 2021 @Steve (sdh2903) / @Dave Eastwood (Gadgetman) - Club Secretary hows this ? 2 Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 22, 2021 Share Posted September 22, 2021 Mmmm, I like that, (another user of the Audi grill, in the nose). Quote Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted September 22, 2021 Share Posted September 22, 2021 👍 Quote Link to comment Share on other sites More sharing options...
Greenstreak-Andy D Posted September 23, 2021 Share Posted September 23, 2021 I did this design about a year ago and have yet to print it. I did notice on my bonnet the RHS was not a symmetrically opposite to LHS. Just to make it interesting! Andy 1 Quote Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted September 23, 2021 Share Posted September 23, 2021 13 hours ago, Dave Eastwood (Gadgetman) - Club Secretary said: Mmmm, I like that, (another user of the Audi grill, in the nose). I'm not sure if the hole being the same size as the nose grill, work on the bonnet vents. I'd need to see them in the flesh etc. Quote Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 23, 2021 Share Posted September 23, 2021 7 minutes ago, Ian Kinder (Bagpuss) - Joint Peak District AO said: same size as the nose grill, No, I think they'd need scaling down, somewhat. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.