Jump to content

Full set of digital dash board bezels now complete


Paul Aspden (MoFast)
 Share

Recommended Posts

  • 2 weeks later...

could someone print me an MXP one for beer tokens please 

Link to comment
Share on other sites

  • 2 weeks later...

I'm trying to decide on finish... So far I've wet sanded with some 1200grit but could do more then maybe leave Matt in contrast to the dash or make it gloss?

 

Thoughts?

PXL_20210404_095905534.jpg

 

Note, the MXS needs a little extra fettling to fit the AIM but easily done with a Dremel or other tools.

PXL_20210329_160920163.jpg

You also need some longer screws to attach the dash. They are M4 and I've ordered some 10mm long.

 

I'm also going to add some drainage holes for rain, just in case.

  • Like 4
Link to comment
Share on other sites

@Tim (TimDave25) - Joint Thames Valley AO looks great. I have already optimised the design so there is more space for the connectors on the back and also put drain holes in for the MXP and MXS.

 

Can someone remind me to update the STL files above later.

 

 

FE475F8D-0399-46E8-B4AC-B8879979BC95.jpeg

8C66C0B2-5ED8-4E83-A3D5-07B29EE742FD.jpeg

  • Like 1
Link to comment
Share on other sites

The MXS and MXP STL files have now been updated in the first post to contain drain holes and a slightly wider hole for the connectors.

  • Thanks 1
Link to comment
Share on other sites

On 05/04/2021 at 10:42, Tim (TimDave25) - Joint Thames Valley AO said:

I'm trying to decide on finish... So far I've wet sanded with some 1200grit but could do more then maybe leave Matt in contrast to the dash or make it gloss?

Thoughts?

I decided a bit of satin black would finish it off nicely.

Buttons arrived too!

PXL_20210406_155443938.jpg

  • Like 6
Link to comment
Share on other sites

Very smart.

 

Link to comment
Share on other sites

Anyone printed the Dash 2 mount and has some pictures with Dash fitted?

Link to comment
Share on other sites

7 hours ago, clansman said:

Anyone printed the Dash 2 mount and has some pictures with Dash fitted?

@Morley yours looks well!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.