Steve (sdh2903) Posted April 24, 2020 Share Posted April 24, 2020 Have some clearout stuff if of any interest. 160mm vdo dip tube fuel level sensor. Only 6 months old and only been fitted for 3 of those. It was the wrong depth sender for my tank. Same as this one (but cheaper at tweeks) https://www.merlinmotorsport.co.uk/p/vdo-dip-type-fuel-sender-160mm-long-224011000160g £SOLD 1 x westfield upper inner column. Latest allegro style. Complete with boss bolt. £make an offer if they're any use SOLD. Steering lower column section. Standard escort size. This one https://www.carbuilder.com/uk/double-ended-splined-shaft £SOLD Set of 16 m12 tuner wheel nuts. Internal Allen drive. These are used and show signs of use as per pic £5 Standard switch connector tails, not sure if these are any use? Headlight, wiper, washer and fog switch tails. Flasher unit connector and a std hazard switch (but no connector tail) £SOLD Freewheel laser cut 8 button steering wheel plate. £SOLD IVA wheel £Sold 8 x eye bolts. All are schroth but only 4 still in packaging. £SOLD Screen fillet. Dark green in colour, bit rough to be honest, it might sand back and polish up but will probably need a paint. SOLD Cable Clutch pedal. £sold Standard mirrors. They were a pristine pair until I dropped an eye bolt onto one and broke the glass. So one needs a glass. £Sold All collected from Houston, renfrewshire or post at cost. If you want any bits quickly I can courier at cost as royal mail are obvs running slower than usual. Link to comment Share on other sites More sharing options...
Liz03 Posted April 24, 2020 Share Posted April 24, 2020 Hi can we have the seat belt rings ,wiring terminals and screen trim how about £25 + postage Thanks chris and liz Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 24, 2020 Author Share Posted April 24, 2020 @Liz03 you have pm. Link to comment Share on other sites More sharing options...
Charlie_Zetec Posted April 24, 2020 Share Posted April 24, 2020 I’ll take the upper and lower steering shafts, please! Attaching bolt for top not required.... Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 24, 2020 Author Share Posted April 24, 2020 1 hour ago, Charlie_Zetec said: I’ll take the upper and lower steering shafts, please! Attaching bolt for top not required.... You have pm @Charlie_Zetec Link to comment Share on other sites More sharing options...
Rusty Nuts Posted April 24, 2020 Share Posted April 24, 2020 Hi Steve, if Liz is not taking the Hazard switch, just the wiring terminals, could I have it please. Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 24, 2020 Author Share Posted April 24, 2020 23 minutes ago, Rusty Nuts said: Hi Steve, if Liz is not taking the Hazard switch, just the wiring terminals, could I have it please. Yep I've pm'd to see if they want the switch too. I'll let you know. Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 25, 2020 Author Share Posted April 25, 2020 screen fillet, eye bolts, wiring tails and hazard switch provisionally sold to @Liz03 Upper inner column and lower 400mm shaft provisionally sold to @Charlie_Zetec Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 28, 2020 Author Share Posted April 28, 2020 Clutch pedal now gone aswell. @Charlie_Zetec @Liz03 your items were sent today Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 29, 2020 Author Share Posted April 29, 2020 Iva wheel now gone. Link to comment Share on other sites More sharing options...
KevanP Posted April 29, 2020 Share Posted April 29, 2020 Hi Steve, just PM'd you Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 29, 2020 Author Share Posted April 29, 2020 50 minutes ago, Kevan Purton said: Hi Steve, just PM'd you mirrors now sold. 1 Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted April 30, 2020 Author Share Posted April 30, 2020 Removed the fuel sender today. My mistake but it actually seems its a 170mm sensor going by the part no and the overall length Link to comment Share on other sites More sharing options...
Steve (sdh2903) Posted May 2, 2020 Author Share Posted May 2, 2020 (edited) dip tube now sold. Button plate sold. Just the wheel nuts left. Edited May 3, 2020 by Steve (sdh2903) Updated Link to comment Share on other sites More sharing options...
RichK Posted May 2, 2020 Share Posted May 2, 2020 Hi Steve, I'll take the freewheel button plate please. Link to comment Share on other sites More sharing options...
Recommended Posts