Jump to content

Clearing a few Bits


BenD

Recommended Posts

Textile technologies supersil hose protection

https://www.textiletechnologies.co.uk/supersil-fire-sleeve-red.html

got this when i had my mx5 turbo to protect the water lines above the manifold, its glass reinforced inside ill be honest horrible stuff if you get the fibers on you

41mm internal diameter fits over a 32mm silicone hose i have 1200mm of this 

IMG_20200315_085018.thumb.jpg.e9195d444fcdfcb7f8720299064c9227.jpgIMG_20200315_085026.thumb.jpg.9dc4b5d43423b5d46440e283d8f6eb7f.jpg

£15 plus Postage

 

same stuff but 16internal diameter i have 1600mm of this 

IMG_20200315_085048.thumb.jpg.4e541f24b334fb8037d20937aa0e1aae.jpgIMG_20200315_085052.thumb.jpg.6e811575cc4f211fdc06cad8be7b1c04.jpg

£10 Plus Post

 

same again but 12mm internal diameter 550mm Long

IMG_20200315_085101.thumb.jpg.9b5dd62dc47eb5990186218c3f53f142.jpgIMG_20200315_085106.thumb.jpg.b45ad067be924ad58aa79d71906ac9f6.jpg

£5 Plus Post 

 

small selection of silicone hoses

IMG_20200315_084642.thumb.jpg.81859395d3f6845725826b4bcd0134cb.jpgIMG_20200315_084648.thumb.jpg.87a0eec53c4dc9760ba181cc09ae4e3f.jpgIMG_20200315_084708.thumb.jpg.14d780f5a198ef286a0d36960a513d07.jpg

there are: Reducers: 16-22, 16-25, 19-25, 28-32, £2 Each plus Postage 

51-63 2 off, 51-60 £3 each plus post

 

90degree BendsIMG_20200315_084708.thumb.jpg.14d780f5a198ef286a0d36960a513d07.jpg

there are 8mm,16mm,16mm,32mm,51mm £3 each plus post

 

Car Builder solutions Bonnet vent

it has some form of glue stuck to it from storage

IMG_20200315_084812.thumb.jpg.5e78d61149bd9564ff6543fbce0e3621.jpgIMG_20200315_084815.thumb.jpg.25afba70f9fb8fa640f9a931b0166688.jpgIMG_20200315_084824.thumb.jpg.d3cabda491092464da0c28bfd3f5638f.jpg

£5 Plus Post

 

open to offers on everything and i can combine postage for multiple items

Link to comment
Share on other sites

Is it just the one 90 you have in 32mm? I need lots of 32mm stuff...

Link to comment
Share on other sites

I’ll have it Ben, PM me your details :)

Link to comment
Share on other sites

few more bits

Mx5 sump baffle

i got this of Mark(Smokey Mow)IMG_20200315_101030.thumb.jpg.4ebe7756f3ba7e1a0510b35588470c85.jpgIMG_20200315_101037.thumb.jpg.a8e54af948215f3aea00ea49c8af9e70.jpg

£10 plus post

 

 

chinesium 52mm gauge holder

IMG_20200315_102226.thumb.jpg.84dccf11b912eafeb6404c48070bae21.jpgIMG_20200315_102228.thumb.jpg.6815e6221d9359e447b79c768e01d7a6.jpg

Free Just cover the postage

 

 

51mm OD Alluminum tube with beaded ends 600mm long has a few storage marks 

IMG_20200315_101116.thumb.jpg.c1fa6684f49b461479a24bc55e36c86f.jpg

£5 Plus Post

 

2inch stainless mandrel 90degree bend has roughly 100mm of leg length either side

IMG_20200315_101110.thumb.jpg.f14a81a91bd03a15461a957337880e04.jpg

£5 Plus Postage

 

2.5inch 400mm long stainless tube

IMG_20200315_101045.thumb.jpg.da710cca2af644ed229a19abca1e3880.jpg

£7 Plus Post

 

Stainless reducer 3inch down to 2.5inch but the tube slide inside

IMG_20200315_101103.thumb.jpg.877b2bab60e23efbc4501d9454e03aa9.jpg

£5 Plus Post

Link to comment
Share on other sites

Genuine Mx5 1.6 camcover GasketIMG_20200315_101531.thumb.jpg.73dec6b43d2bf36f49828df259e8aa75.jpgIMG_20200315_101543.thumb.jpg.20bc20fe33b5d335d7149477cb17be16.jpg

£15 Plus Post

 

Various Mx5  spares

IMG_20200315_102033.thumb.jpg.28119dcf6ca001f11398dfe5964c4dd1.jpg

all of these bits are from a 1.6 long nose mk1 engine except for the oil pickup pipe which is from a 1.8 engine and the big long silver bolts with nuts are genuine mazda rear arm bolts that hold the bottom of the upright to the wishbone. if you see anything you want let me know the price are cheap as they will be retired to my scrap pile if not

IMG_20200315_102157.thumb.jpg.766c8f57e5c114dfb714674cf3f3bacd.jpg

same goes for these bags of bolts. there are a set of clutch bolts, a set of sump bolts, a set of flywheel bolts, a few camcover bolts, and a set of 1.6 head bolts and a bag of random bolts i cant confirm if these bags are complete sets or not ive gone through that many engines i just dont know. same goes for these prices are cheap as otherwise destined for the scrappy just cover delivery or come and get them.

 

a pair of engine mount rubbers

these are brand new they were purchased from burtons i know they are taller than the standard ones i got them to raise my mx5 engine up but never used them

IMG_20200315_103545.thumb.jpg.ef57a633a779344acb4df8d4eafbabea.jpg

£10 Plus Postage

 

Link to comment
Share on other sites

  • 1 month later...
2 hours ago, Steve (sdh2903) said:

What height are the engine mounts ben?

52mm high 72mm diameter 

Link to comment
Share on other sites

Could I take a 90 degree 51mm hose if available please? 

Link to comment
Share on other sites

Could I take a 16-22 reducer and 2 x 16mm 90Deg bends if you still have them?

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.