Mole Posted May 6, 2019 Share Posted May 6, 2019 Have tried locally and had a look online - looking for one or two of the grommets that go in nose cone for bonnet spigots to fix into.. but cannot get the right size at local suppliers Any one know a source.. or is it a Wf only item?? many thanks Quote Link to comment Share on other sites More sharing options...
Andy (Sycho) Posted May 6, 2019 Share Posted May 6, 2019 @Ben (bunje) had some of them for sale. Quote Link to comment Share on other sites More sharing options...
DamperMan Posted May 6, 2019 Share Posted May 6, 2019 I think they are these... Look at this on eBay Fasteners Grommets INT 11 MM EXT 19 MM All Vehicles Part Number: 718 Pack of 20 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F321569098424 Quote Link to comment Share on other sites More sharing options...
Mole Posted May 6, 2019 Author Share Posted May 6, 2019 thanks Gents.. spot on.. Quote Link to comment Share on other sites More sharing options...
Mark Tearney Posted May 10, 2019 Share Posted May 10, 2019 I bought these they do the job spot on. Quote Link to comment Share on other sites More sharing options...
Mole Posted May 11, 2019 Author Share Posted May 11, 2019 Thanks mark..as the ones damperman had suggested arrived yesterday and they are not correct..they have 11mm internal but the 19mm is the od of the grommet not hole size so they are too small! So will have a look at those.. Quote Link to comment Share on other sites More sharing options...
kenton Posted May 11, 2019 Share Posted May 11, 2019 This is what I picked up from my local CEF when one of mine fell out. https://www.cef.co.uk/catalogue/categories/cable-grommets-super-cable-grommets Been in for 7000 miles so cant be bad. Kenton Quote Link to comment Share on other sites More sharing options...
Mark Tearney Posted May 11, 2019 Share Posted May 11, 2019 5 hours ago, Mole said: Thanks mark..as the ones damperman had suggested arrived yesterday and they are not correct..they have 11mm internal but the 19mm is the od of the grommet not hole size so they are too small! So will have a look at those.. I had to trim them up to fit properly, due to a slightly different thickness of material on both sides of the bonnet. Glued them in with Gorilla glue. Quote Link to comment Share on other sites More sharing options...
Mole Posted May 11, 2019 Author Share Posted May 11, 2019 Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.