Jump to content

Free stuff.


Steve (sdh2903)

Recommended Posts

Having a sort out as the garage is a tip. All free if you can put to use before I bin it. Either collect from pa6 or postage at cost. 

4 x wheel spacers. Smidge under 20mm thick. Donated to me but needed a different size. GONE 

 

clutch pedal for cable clutch

20190324_153103-1134x2016.thumb.jpg.02397e36c2cb34ae8584afb4ad2de3dc.jpg

2 x standard fuse boxes GONE

 

2 x plastic mounting plinth for 95mm lights (not angled)

20190324_153611-1134x2016.thumb.jpg.6e0c6ad454518fc9a742307168f144e5.jpg

alternator pulley. Came off a 40a denso

20190324_153351-1134x2016.thumb.jpg.40a70fa0ee3a75ce507dc0592a505d1c.jpg

Pair of brake flexies. Never used. One locknut and 1 sealing washer missing GONE

 

 

Haynes manuals GONE

 

duratec/EcoBoost thermostats. Cant definitely say what temp they are. I *think* the shorter one is 82 and the bigger 90 but not 100% SHORTER ONE GONE.20190324_153828-1134x2016.thumb.jpg.2fe47a13a37d09072a49b65dca5a5db7.jpg

2" exhaust clamps x2 GONE

 

5 rib aux belt

20190324_154602-1134x2016.thumb.jpg.318ed2e54e2a981cfe22c05135a0e88a.jpg

Link to comment
Share on other sites

Steve I'll be interested in brake flexis if they suit Sierra rears by any chance?

Link to comment
Share on other sites

I'll  have the fuse boxes please..

Postage  to derby..  thanks

Link to comment
Share on other sites

@Chris King - Webmaster and Joint North East AO

I assume they'll be ok for Sierra rears thread wise but may be a bit short on length? Your welcome to them to try and if no good list them back up?

@CRAIGR  @Wowblaauw PM me your addresses and I'll post them then let you know the cost rather than guessing if that suits? 

Link to comment
Share on other sites

1 minute ago, Steve (sdh2903) said:

 Your welcome to them to try and if no good list them back up?

Sounds good to me - I’ll pass them on to @CRAIGR if they don’t suit. 

You got my address still?

Link to comment
Share on other sites

1 hour ago, Chris King - Webmaster and Joint North East AO said:

Steve I'll be interested in brake flexis if they suit Sierra rears by any chance?

Sierra rear  and indeed cortina fronts are m10x1.0.   

Link to comment
Share on other sites

Sure Brad. PM me your address and I'll chuck in the post then let you know how much.

Link to comment
Share on other sites

Hi Steve.  

Do you know what the ribbed belt is off? 

Im after a spare for my silvertop zetec but it's a non standard size. 

Cheers 

Phil

Link to comment
Share on other sites

Hi Phil it's not off anything specific. I just ordered it slightly too short for my build. The 838 part of the number is the overall length (or circumference) of the belt in mm.

Link to comment
Share on other sites

40 minutes ago, Steve (sdh2903) said:

Hi Phil it's not off anything specific. I just ordered it slightly too short for my build. The 838 part of the number is the overall length (or circumference) of the belt in mm.

Ok no worries I need a 1000mm one. 

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.