Jump to content

Duratec Cosworth supercharger kit


Stephen W

Recommended Posts

Cosworth Supercharger kit

Eaton M62 supercharger

Cast housing and inlet manifold

Inbuilt charge cooler

DBW throttle but a cable one will fit too

550cc injectors (brand new)

Map sensor

Intake temp sensor

Idler pulley

Auto tensioner 

Charge cooler kit with pump, radiator and header tank

Cosworth fuel rail but the standard one is fine

Assorted hoses

 

3.3” pulley for 250bhp 7psi

2.9” pulley for 300bhp 12psi

 

Will fit 2.0 2.3 and 2.5. 

 

Lovely compact unit that should fit.....just in a 7.

£2500  £2000

 

 

 

8CB68ABA-02E8-4A00-8F3B-C44D5427D45B.jpeg

  • Like 1
Link to comment
Share on other sites

11 minutes ago, Thrustyjust said:

Is this similar to what goes in the C*****hams ?

They use a Rotrex type charger I believe. 

Link to comment
Share on other sites

Also this will work with the standard bottom end and head/cams. 

The 2.9" Pulley @ 12psi will test it a little but in a car as light as a 7, it should be fine. 

Plenty of people using them in MX-5 as this boost on stock bottom ends. 

Link to comment
Share on other sites

13 hours ago, Greenstreak-Andy D said:

Did you have this fitted to your Westie @Stephen W?

No I had it on an MX-5 I've just bought. 

Its getting sold as I'm building another mental 260bhp+ N/A Duratec for it. 

Link to comment
Share on other sites

Does it need anything else to get it going in a Mazda ?, as daughters other half has considered getting his done. Although might be at the wrong time for him to buy............

Link to comment
Share on other sites

11 hours ago, Thrustyjust said:

Does it need anything else to get it going in a Mazda ?, as daughters other half has considered getting his done. Although might be at the wrong time for him to buy............

Yes.

For an MX-5 it'd need, a pulley set up, a different thermostat housing and the PS pump lifting 10mm. 

Then a tune via a ECUTEK dealer. 

Not ott work, but work none the less.  

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.