SXRORY Posted February 6, 2019 Share Posted February 6, 2019 On 05/02/2019 at 07:36, Chris King - Webmaster and Joint North East AO said: I vinyl wrapped mine before I found some carbon guards, was easy enough to do and looked ok. It offered minimal protection, but certainly better than none Swapped my metal ones out as they where goosed and wanted a more modern look and realised It does not make a whole lot of sense using carbon fibre to cover pockmarked grp with loads of rivet holes. Looks good though. Carbon NV is got to be the shout but not many wide arches are there? Link to comment Share on other sites More sharing options...
Andy (Sycho) Posted February 6, 2019 Share Posted February 6, 2019 6 hours ago, Chris King - Webmaster and Joint North East AO said: Pretty sure @Andy (Sycho) did something similar for cage protectors albeit with easier shapes. Yes I made some cage protectors using a carbon skinning kit, I taped up the cage so i could remove it once it had cured. Not sure how you would do that with the arch. Link to comment Share on other sites More sharing options...
NickBW Posted February 7, 2019 Share Posted February 7, 2019 I am pretty sure Christoph can help https://www.instagram.com/westfield.de/ www.westfeild.de great guy! Super helpful and very knowledgeable 1 Link to comment Share on other sites More sharing options...
Recommended Posts