Jump to content

CNC micro mill conversion


Kit Car Electronics

Recommended Posts

Over the years, I've found myself wanting to drill and machine lots of small bits of plastic and aluminium - particularly now that I make cases for various electronic projects, so I've treated myself to a Proxxon MF70 micro mill that I plan to convert to CNC. It's VERY small, but has a good reputation for accuracy and the conversion to stepper motor drive is well documented already.

Still, thought I'd post it on here in case anyone else is doing the same...

46764830_182716222670283_6637871290248069120_n.thumb.jpg.41f62557f5b95f653a2f9052166396c1.jpg

 

  • Like 3
Link to comment
Share on other sites

Bizzarely it was way cheaper from Amazon.de (it's a German company) than anywhere else, with free Prime delivery, even though it still came from Sarl... (240Euro)

  • Like 1
Link to comment
Share on other sites

I've had one of those for a few years now and it's very useful. It's great for aluminium or brass, steel needs more care and very small cuts. 20180926_112126.thumb.jpg.1036a45b42539c1aed55b3eb0e0b89ed.jpgAs a novelty I  made the item in the pictures for fun.20180926_112047.thumb.jpg.72d5d9d48fdff9b528ed2f0731e8f6ac.jpg

  • Like 5
Link to comment
Share on other sites

I love those sorts of traditional apprentice pieces David, my favourite is always the cubes within cubes; both just to see the end result, and these days, thanks to the glories of YouTube, I can waste ages just watching them being machined out from a solid piece of stock.

Link to comment
Share on other sites

1 hour ago, Dave Eastwood (Gadgetman) - Club Secretary said:

I love those sorts of traditional apprentice pieces David, my favourite is always the cubes within cubes; both just to see the end result, and these days, thanks to the glories of YouTube, I can waste ages just watching them being machined out from a solid piece of stock.

I've done one of those too, a bit scruffy but satisfying. I've always wanted one so had to make it. It's from a 50mm cube. The black marks are because I hadn't finished cleaning it before I took the pic.

20180926_111945 (Medium).jpg

  • Like 6
  • Thanks 1
Link to comment
Share on other sites

Yep, always wanted one too, but never had the knowledge/skill let alone the kit to make one. Tried to find them occasionally, but everyone that’s made them seems to have sweated so hard over them, none will part with them - and I don’t blame them either!!

Link to comment
Share on other sites

Looks dead easy, Dave. There are pre-made mounting brackets for the steppers and very cheap Arduino shields for the stepper  motor drivers.

Add an NVR switch, an old laptop power supply and a PC fan - then it's ready to go. The Arduino code is available and just loaded, with a free G-Code sender software for the laptop. I've hooked up one motor and it seems to be working...

Total conversion cost about £120

IMG_20181125_162540659.thumb.jpg.80a13256c877590145b82423a36e53eb.jpg

  • Like 2
Link to comment
Share on other sites

3 hours ago, Kit Car Electronics said:

Looks dead easy, Dave. There are pre-made mounting brackets for the steppers and very cheap Arduino shields for the stepper  motor drivers.

Add an NVR switch, an old laptop power supply and a PC fan - then it's ready to go. The Arduino code is available and just loaded, with a free G-Code sender software for the laptop. I've hooked up one motor and it seems to be working...

Total conversion cost about £120

IMG_20181125_162540659.thumb.jpg.80a13256c877590145b82423a36e53eb.jpg

Only bit I understood of that post was "£120" :suspect:

  • Haha 8
Link to comment
Share on other sites

  • 1 month later...

Finished, all the motors are working, seems like good value for total cost of £400 approx, including the CNC controller that just hooks up to a laptop with the USB lead. It should be perfect for machining the small plastic electronics cases that I play around with.49774135_993132290878378_2467345710962442240_n.thumb.jpg.e2a4fc78a94307e42a162269acbf5ac3.jpg

 

  • Like 6
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.