Dave Eastwood (Gadgetman) - Club Chairman Posted September 16, 2018 Share Posted September 16, 2018 Thinking my rear set of tyres were both well below the legal, limit, in fact, bald in the middle, and as I couldn’t get more new in that size, I ordered a set of Nankings to try. When I came to remove the wheels to take to ATS for the new tyres to be put on, I realised it was actually only one Tyre that was that bad! It’s not exactly road legal, and too far gone even for track day use. But could be used temporarily if it was just on a car in-build, for rolling the car around. The other rear tyre has around 4.0 to just under 4.5 mm tread and the two fronts have around 4.5 - 5.0 mm tread, the tyres are however roughly five years old, (by date code). They were dry stored before I bought the wheels they went on, in frost free conditions and protected thoroughly from UV light. They've been on the car for just shy of three years, they are a little harder now than when brand new. Selling as a set of four, just cause I need them all out of the way, but consider the fourth, a free gift! Make me an offer! Need them either collected, or could take to the Speed Series Awards dinner. Link to comment Share on other sites More sharing options...
1960dave Posted September 16, 2018 Share Posted September 16, 2018 No need for the photos I will take them Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 16, 2018 Author Share Posted September 16, 2018 No worries Dave! Link to comment Share on other sites More sharing options...
1960dave Posted September 17, 2018 Share Posted September 17, 2018 Just checking they are 13" diameter Link to comment Share on other sites More sharing options...
Ian Kinder (Bagpuss) - Joint Peak District AO Posted September 17, 2018 Share Posted September 17, 2018 20 minutes ago, 1960dave said: Just checking they are 13" diameter They'll be 15" Link to comment Share on other sites More sharing options...
1960dave Posted September 17, 2018 Share Posted September 17, 2018 Thanks Ian half asleep last night Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted September 17, 2018 Author Share Posted September 17, 2018 Nope, as in title, 15” diameter. R1R’s were never made in 13’s, so still for sale? 1 Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted October 9, 2018 Author Share Posted October 9, 2018 Bump, need these gone. Make me an offer! Link to comment Share on other sites More sharing options...
Kingster Posted October 9, 2018 Share Posted October 9, 2018 If they don’t go Dave I’ll take the fronts off you in November. Link to comment Share on other sites More sharing options...
Dave Eastwood (Gadgetman) - Club Chairman Posted October 9, 2018 Author Share Posted October 9, 2018 No worries Chris. Link to comment Share on other sites More sharing options...
Recommended Posts