Jump to content

New 175lb Springs. Coolant & Fuel system AN fittings.


TableLeg

Recommended Posts

2 minutes ago, mr_mcp said:

Hi, what engine are the plugs for?

Various cars

  • Peugeot 206 Hatchback 1.4 i (1998 - ) 55kW
  • Peugeot 206 Hatchback 1.1 i (1998 - ) 44kW
  • Citroën Saxo Hatchback 1.1 X,SX (1996 - 2004) 44kW
  • Peugeot 106 Mk II 1.1 i (1996 - ) 44kW
  • BMW Z3 Convertible 1.9 (1995 - 2003) 103kW
  • BMW 5 Series Saloon 523 i (1995 - 2003) 125kW
  • Peugeot 106 Hatchback 1.1 (1991 - 1996) 44kW
  • Porsche Boxster Convertible 2.5 (1996 - 2004) 150kW
  • BMW 5 Series Saloon 528 i (1995 - 2003) 142kW
  • Citroën Xsara Hatchback 1.4 i (1997 - 2005) 55kW

But the specs of the plug are as follows:

Technical Information:

General:
  • Type: Resistor type
  • Thread Size: 14mm (9/16")
  • Hex Size: 16mm (5/8")
  • Reach: 19mm (3/4")
  • Gap: 0.9mm (0.04")
  • Thread Pitch: 1.25mm (1/16")
  • Height Standard: ISO
Centre Electrode:
  • Type: Standard
  • Material: Nickel
  • Size: 2.5mm (1/8")
  • Projection: Extended Projection
Ground Electrode:
  • Type: Standard
  • Material: Nickel
  • Electrode Count: 2
   
   
   
   
   
   
   
   
   

 

 

Link to comment
Share on other sites

4 minutes ago, TableLeg said:

Various cars

  • Peugeot 206 Hatchback 1.4 i (1998 - ) 55kW
  • Peugeot 206 Hatchback 1.1 i (1998 - ) 44kW
  • Citroën Saxo Hatchback 1.1 X,SX (1996 - 2004) 44kW
  • Peugeot 106 Mk II 1.1 i (1996 - ) 44kW
  • BMW Z3 Convertible 1.9 (1995 - 2003) 103kW
  • BMW 5 Series Saloon 523 i (1995 - 2003) 125kW
  • Peugeot 106 Hatchback 1.1 (1991 - 1996) 44kW
  • Porsche Boxster Convertible 2.5 (1996 - 2004) 150kW
  • BMW 5 Series Saloon 528 i (1995 - 2003) 142kW
  • Citroën Xsara Hatchback 1.4 i (1997 - 2005) 55kW

But the specs of the plug are as follows:

Technical Information:

General:
  • Type: Resistor type
  • Thread Size: 14mm (9/16")
  • Hex Size: 16mm (5/8")
  • Reach: 19mm (3/4")
  • Gap: 0.9mm (0.04")
  • Thread Pitch: 1.25mm (1/16")
  • Height Standard: ISO
Centre Electrode:
  • Type: Standard
  • Material: Nickel
  • Size: 2.5mm (1/8")
  • Projection: Extended Projection
Ground Electrode:
  • Type: Standard
  • Material: Nickel
  • Electrode Count: 2
   
   
   
   
   
   
   
   
   

 

 

Ah ok, no good for me unfortunately. Thanks for the quick response!

Link to comment
Share on other sites

I'd like the push button starter kit please. Can I collect from Stoneleigh on the Sunday? 

 

Many thanks, 

Gary. 

Link to comment
Share on other sites

10 minutes ago, Zetec1.6 said:

Hi,

i’ll take The hub nut covers please.

Thanks

You have PM.

Link to comment
Share on other sites

I’ll take the spare wheel carrier please 

will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you 

Link to comment
Share on other sites

1 hour ago, banshee said:

I’ll take the spare wheel carrier please 

will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you 

You will also require the support bar, that bonds behind the rear panel, to which the spare wheel is bolted. Without this the wheel carrier is unlikely to take the weight.

  • Like 1
Link to comment
Share on other sites

Absolutely, what Dave said. 

Link to comment
Share on other sites

One on mine is very scabby it will be a replacement&

Link to comment
Share on other sites

4 hours ago, banshee said:

I’ll take the spare wheel carrier please 

will be at Stoneleigh first thing Monday or whereabouts in Suffolk are you 

You have pm.

Link to comment
Share on other sites

Bump

Link to comment
Share on other sites

  • 2 weeks later...

Bump

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.