X361782 Posted December 3, 2016 Share Posted December 3, 2016 can anyone offer any advice as to how you fit the dipstick tube once the exhaust manifold is in place. the manual just says to remove it and refit it after. I take it you need to bend it to fit it?? Cheers Quote Link to comment Share on other sites More sharing options...
dombanks Posted December 3, 2016 Share Posted December 3, 2016 i found that the standard one that was fitted to the engine on the two st170s i used would not fit around the exhaust. even with bending. it was the metal clip that was at the top seemed to be wrong. the race line water rail did not help. i bought a new one from kit spares which had a slightly different bit at the top and it only needed a bit of adjustment. Quote Link to comment Share on other sites More sharing options...
Kingster Posted December 3, 2016 Share Posted December 3, 2016 I managed to bend my std one to fit. Quote Link to comment Share on other sites More sharing options...
DE04* Posted December 4, 2016 Share Posted December 4, 2016 Made my standard one fit. To get it out just pull it strait upwards Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.