Jump to content

Varios bits


Rob Navin

Recommended Posts

Need to clear some space in the garage.

2 pinto's need a home ( any body with a boat that you dont want to float away ?  these make great anchors )

1 1600cc X-Flow block ( the finest engine known to man.)

1 1300cc X-Flow block

1 2000e gearbox.

All need a loving home before they end up in the skip.

Tel 07984 164184

Rob

Link to comment
Share on other sites

Where are you Rob?

I could take the 1600 Xflow block as a strategic spare if its 711m and it will stand over-boring.

Gary

Brighton/Bucks

ggd@mm-brig.mottmac.com

Link to comment
Share on other sites

Garry.

It is a 711 block but Its a 1700.  It has got pistons and a cam with it.

I am in Chesterfield, Derbyshire.  Give me a shout if you are still intrested.

Link to comment
Share on other sites

...boat anchors ... ?

Don't like to look backwards Rob, but my boat anchor regularly went quicker that your little red sewing machine last season !

See you three slappers

Steve

Link to comment
Share on other sites

Steve. you may be able to look backwards but obviously not in colour....my little red sewing machine was cream as far as I recall.

Plus its only 1700 not a 2lt so shouldn't you be a lot quicker ?

Some one else does share your strange beliefs and the Pinto's and the gearbox have gone.

Not going to 3's slappers cos I break things whenever I go there !!!

Link to comment
Share on other sites

Are either of the Pinto Heads converted to unleaded?

A friend of mine is looking for one for his Marlin.   I'm sure he will take the whole lump if one does.

:)

Link to comment
Share on other sites

This could turn into the 8 valve alternitaive to the VX - Zetec debate.  :D  :D  :D:d  :D

Link to comment
Share on other sites

Hey Bobby Boy (AKA Navin 'Ca Ching' Motorsport)

You finally had a tally up of your expenses, and realise you need to off load some old junk to pay your bills.

After having a good old nosey round your car the other day, I've spotted some area's of improvement / lightening that I'll consult with you on.  For a fee.

Link to comment
Share on other sites

Thanks for that Mike I look forward to the advice.  Can you keep it cheap, as you point out I'm working to a lesser budget than yourself.

Not getting rid of the stuff for the need for cash ( But it's always nice) but I cant get round the Escort to work on it properly ( Selling spares is easier than a diet! ) and I have just lost the last garage I can borrow for the road car.  Unles you have got space in yours that you can let me use.

Just making the final deiscion on class now before I send the entry in..... oh what to do....

Link to comment
Share on other sites

I don't want to seem competitive Mike but I have just notices that you are one post ahead of me on the board

this must make us even  :D  :D  :D  :D  :durr:

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

Please review our Terms of Use, Guidelines and Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.