John Loudon - Sponsorship Liaison Posted October 14, 2002 Share Posted October 14, 2002 Brand new uprated AP Racing clutch cover and friction plate - still boxed £100 Brand new Piper vacuumless Lucas side exit distributor with modified advance curve to max 35 degrees. New cap and rotor included but no drive gear - still boxed £35 One piece steel front pulley for X/Flow - £15 Alloy rocker cover for dry sumped X/Flow - £15 Rocker assembly with steel rocker posts for X/Flow - £20 High pressure oil pump for X/Flow, good condition - £10 X/Flow thermostat housing with rad cap filler neck (Mk1 XR2) - £10 Standard X/Flow crank (ground to -0.010"), standard rods and standard flywheel suitable for lightening - £25 the lot Various other X/Flow odds and sodds. Let me know if theres something your need. I might have it. Im in Coventry Regards, John Loudon 07971 576848 02476 511518 jloudon@usa.net Link to comment Share on other sites More sharing options...
studbuckle Posted October 14, 2002 Share Posted October 14, 2002 John, YHM Link to comment Share on other sites More sharing options...
Gazza Posted October 14, 2002 Share Posted October 14, 2002 Hi John! Do you have an alloy WET sump rocker cover going spare? I'd like a spare one to experiment with different breather arrangements. D'ya have any (unused! Xflow gaskets such as: Big-bore exhaust Sump (competition or cork) Rocker cover Inlet Timing chain cover Rear oil seal cover Water pump I'll gladly have any of the above off you. Trust your Puma-isation's going OK Link to comment Share on other sites More sharing options...
John Loudon - Sponsorship Liaison Posted October 14, 2002 Author Share Posted October 14, 2002 Gary and Studbuckle Ive sent you both an email. JL Link to comment Share on other sites More sharing options...
Recommended Posts